Zyvpee
Zyvpee AUB0812VH -CW23 12V .41A 4-pin 80×80×25 mm case fan
An 80 × 80 × 25 mm 12 V case fan with a 4-pin connector and ball bearing for CPU cooler compatibility
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- Reliable long-life operation backed by ball-bearing design
- Precise speed control via 4-pin PWM connector
- Fits tight 80 mm square mounting spaces
- Efficient 12 V 0.41 A power draw for standard headers
- Non-LED black frame keeps builds clean and distraction-free
Zyvpee AUB0812VH 80 mm 4-pin CPU cooler fan
This Zyvpee AUB0812VH is an 80 by 80 by 25 mm case fan designed for CPU cooler mounting. It runs on 12 V and draws 0.41 A through a 4-pin PWM connector. The ball bearing and non-LED black frame suit standard cooling duties.
Who this suits and who should look elsewhere
Builders replacing or upgrading an 80 mm CPU cooler fan with a 4-pin PWM connection will find a direct fit. It is not for systems that only provide 3-pin voltage control or require a different mounting pattern. Buyers needing LED lighting or a larger frame size should consider other models.
The specification that decides fit
The 4-pin PWM power connector determines whether the motherboard or fan controller can regulate speed automatically. If your header is 3-pin only, speed control will be limited to voltage regulation. Verify the connector type before purchase.
Kohokohdat
- Reliable long-life operation backed by ball-bearing design
- Precise speed control via 4-pin PWM connector
- Fits tight 80 mm square mounting spaces
- Efficient 12 V 0.41 A power draw for standard headers
- Non-LED black frame keeps builds clean and distraction-free
Tekniset tiedot
| Series | AUB0812VH |
|---|---|
| Model | AUB0812VH |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 80*80*25MM |
Kysymyksiä tästä tuotteesta
What motherboard header does the 4-pin connector on this AUB0812VH plug into?
The 4-pin connector fits a standard 4-pin PWM header on the motherboard, providing power and speed control for the 12V .41A motor.
Will this 80 mm Delta 8025 fan line up with the screw holes on my existing 80 mm cooler?
Yes, the 80×80 mm frame matches the standard 80 mm mounting pattern used on most CPU coolers of that size.
How can I confirm the ball-bearing fan is spinning at the correct speed after installation?
Check the RPM reading in BIOS or fan-control software; the 4-wire PWM signal reports real-time speed so you can verify operation immediately.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001045BTC
Varastossa