Zyvpee
Zyvpee KDE1204PFVX 11.MS.AF.GN 40mm 12V 1.8W 3-pin case fan
40 mm Maglev fan spins below 1600 RPM on a 3-pin connector for compact CPU cooling
- TypeCPU Cooler Fan
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 40 mm frame fits tight chassis spaces
- Maglev bearing reduces friction for quieter operation
- Low 1.8 W draw keeps power consumption minimal
- Spins below 1600 RPM for gentle airflow
- Simple 3-pin connector enables direct motherboard control
Compact 40 mm Maglev CPU Cooler Fan
The Zyvpee KDE1204PFVX is a 40 mm maglev fan designed for tight CPU cooler mounts and small-form-factor builds. It runs on 12 V and draws 1.8 W while spinning under 1600 RPM. The three-pin connector provides basic speed reporting for motherboard headers.
Three-Pin Power and Shallow 10 mm Depth
The 10 mm frame depth lets the unit sit in low-profile coolers, router chassis or switch enclosures where thicker fans will not fit. A standard three-pin header supplies power and tachometer signal without PWM control. No LED lighting keeps the assembly dark for server or workstation use.
Bare Fan Without Mounting Hardware
The package contains only the fan itself as shown in the supplier photographs. No screws, adapters or speed cables are included, so installers must provide their own mounting kit. Buyers who need PWM control or bundled accessories should look elsewhere.
Kohokohdat
- Compact 40 mm frame fits tight chassis spaces
- Maglev bearing reduces friction for quieter operation
- Low 1.8 W draw keeps power consumption minimal
- Spins below 1600 RPM for gentle airflow
- Simple 3-pin connector enables direct motherboard control
Tekniset tiedot
| Brand | Zyvpee |
|---|---|
| Series | KDE1204 |
| Model | KDE1204PFVX |
| Type | CPU Cooler Fan |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | cpu cooling |
| Dimensions | 40*10mm |
| Package Contents | refer to title |
Kysymyksiä tästä tuotteesta
Will the 1600 RPM ceiling limit airflow during a sustained load?
The fan is rated below 1600 RPM, so that ceiling is the maximum speed it will reach under continuous operation.
How much heat and noise does the 1.8 W motor add during all-day use?
At 1.8 W the motor adds very little heat, and the Maglev bearing keeps acoustic output low even during extended runs.
What motherboard header is required for the 3-pin connector?
A standard 3-pin fan header supplies the 12 V needed for this cooler.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001036BTC
Varastossa