Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square AC axial case fan in two-tone finish with visible ball bearing rotor and two-pin connector

Zyvpee

Zyvpee MA77B3S-922 172*150*51mm AC axial case fan

SKU CH-X8S5-8KAT8

AC axial case fan with ball bearing delivering over 80 CFM at 3000–3499 RPM on 220–240 V power

  • TypeCase Fan
  • CompatibilityAC Axial fan
  • Fan Size170mm
  • Bearing TypeBall
  • RPM3000-3499 RPM
  • Air Flow>80 CFM
  • High airflow exceeding 80 CFM for effective cooling
  • Ball bearing design ensures durable long-term operation
  • AC powered 220-240V 50/60Hz direct mains connection
  • Compact 172x150x51mm frame fits standard mounting points
  • Non-LED 2-tone finish suits professional build aesthetics

Zyvpee MA77B3S-922 AC Axial Case Fan

The Zyvpee MA77B3S-922 is an AC axial case fan built for 220 to 240 volt mains power at 50 or 60 hertz. It draws zero point one three amps and connects through a two-pin plug. The unit suits enclosures that can accept a 170 millimetre frame and need direct AC drive.

200 CFM Airflow at 3200 RPM

The manufacturer rates airflow at 200 CFM while the spindle turns at 3200 RPM. This single figure decides whether the fan can move enough air for the target chassis. Buyers who need a lower noise profile or a different airflow target should look elsewhere.

Fits 172 by 150 by 51 Millimetre Cut-Out

The housing measures 172 by 150 by 51 millimetres and uses ball bearings for durability. It requires a matching rectangular opening and a mains-rated two-pin supply. The non-LED two-tone design adds no lighting load, leaving the full current budget for cooling.

Kohokohdat

  • High airflow exceeding 80 CFM for effective cooling
  • Ball bearing design ensures durable long-term operation
  • AC powered 220-240V 50/60Hz direct mains connection
  • Compact 172x150x51mm frame fits standard mounting points
  • Non-LED 2-tone finish suits professional build aesthetics

Tekniset tiedot

SeriesMA77B3S-922
ModelMA77B3S-922
TypeCase Fan
CompatibilityAC Axial fan
Fan Size170mm
Bearing TypeBall
RPM3000-3499 RPM
Air Flow>80 CFM
Power Connector2 Pin
Color2-Tone
LEDNon-LED
FeaturesAC Axial Fan
Dimensions172*51mm

Kysymyksiä tästä tuotteesta

How does the 200 CFM airflow rating translate to actual cooling inside a typical case?

The 200 CFM rating indicates high-volume air movement at 3200 RPM, suitable for exhausting heat from densely packed enclosures or server racks where static pressure matters.

What does the 2-pin AC connector mean for speed control and power sourcing?

The 2-pin connector supplies 220/240 V AC directly from mains; no PWM or voltage regulation is possible, so the fan runs at fixed 3000-3499 RPM whenever powered.

Will the 172 mm by 51 mm frame with 150 mm mounting centres fit standard 170 mm case cut-outs?

The 172×150×51 mm housing matches 170 mm fan openings with 150 mm hole spacing; verify your chassis has clearance for the 51 mm depth and AC wiring.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.