Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray 120mm square case fan with red LED and 4-pin connector

Zyvpee

Zyvpee MF120R DF1202512RFMN 120mm case fan red LED 4-pin

SKU CH-D8WY-DDK2Z

120 mm DC case fan with red LED runs at 1600-1999 RPM via 4-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • RPM1600-1999 RPM
  • Power Connector4 Pin
  • ColorGray
  • LEDRed
  • Red LED illumination adds visual flair to the build
  • 4-pin PWM connector enables precise speed control
  • 120 mm square frame fits standard case mounts
  • 1600-1999 RPM range delivers strong airflow
  • 2 V 0.37 A draw keeps power use low

120 mm case fan with red LED

The Zyvpee MF120R DF1202512RFMN is a 120 mm case fan designed for standard chassis cooling. It targets builders who want active airflow with a red LED accent. The unit runs on a 2 V, 0.37 A DC motor and spins between 1600 and 1999 RPM. It fits any case that accepts 120 * 120 * 25 mm mounting points.

Check 4-pin header and voltage

Verify that your motherboard or fan controller provides a 4-pin PWM header for speed control. Confirm the board can supply the required 2 V operating voltage for this specific model. Ensure the chassis has clearance for the 25 mm thickness at the intended mounting location. The red LED illumination is tied to the fan power circuit and cannot be switched independently.

Gray frame with fixed red lighting

The gray plastic frame houses a 4-wire, 4-pin connector for straightforward installation. Fixed red LEDs light up whenever the fan receives power, adding a constant glow inside the case. The 25 mm profile uses standard screw holes compatible with typical 120 mm mounts. The DC motor design delivers direct current operation without additional controllers.

Kohokohdat

  • Red LED illumination adds visual flair to the build
  • 4-pin PWM connector enables precise speed control
  • 120 mm square frame fits standard case mounts
  • 1600-1999 RPM range delivers strong airflow
  • 2 V 0.37 A draw keeps power use low

Tekniset tiedot

BrandZyvpee
SeriesMF120R
ModelDF1202512RFMN
TypeCase Fan
CompatibilityCase
RPM1600-1999 RPM
Power Connector4 Pin
ColorGray
LEDRed
FeaturesDC Case Fan
Dimensions120 *120 *25mm

Kysymyksiä tästä tuotteesta

What comes in the box with the Zyvpee MF120R DF1202512RFMN and do I need extra cables?

The fan ships as a single 120 mm unit with a 4-pin power connector attached; no additional cables or mounting screws are included.

How do I choose between the speed range and the voltage for my build?

The fan runs between 1600 and 1999 RPM at 2 V and 0.37 A; pick it if your motherboard header can supply that voltage and you want the listed speed band.

What does the 1600-1999 RPM figure mean once the fan is installed?

In a real system the fan will spin within that range depending on the PWM curve set in BIOS, delivering airflow proportional to the speed the curve requests.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.