Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Zyvpee

Zyvpee MF20060V3-1C02C-G99 20x6mm 5V 0.11W 3-wire blower case fan

SKU CH-66XG-VA5G9

Compact 20 by 6 mm blower fan draws 0.11 W at 5 V with a three-wire ball-bearing motor

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • Compact 20 mm blower fits tight CPU coolers
  • 5 V / 0.11 W draw keeps power use low
  • 3-wire connector enables speed monitoring
  • Ball bearing ensures durable rotation
  • Non-LED black design suits any build

Compact blower for tight CPU coolers

This 20 mm by 6 mm blower fan fits inside small-form-factor CPU coolers where a standard frame will not sit. It runs on 5 V and draws 0.11 W, so it suits low-power thermal zones. The three-wire lead provides speed feedback without PWM control.

Ball-bearing 3-wire 5 V spec

The single spec that decides fit is the 20 mm square footprint combined with a 6 mm thickness and a 5 V three-wire interface. Ball bearings give longer life than sleeve types at this scale. No other voltage or connector variant is offered for this model.

Press-in install, watch polarity

The fan presses into the cooler shroud or mounts with two tiny screws; no special tools are needed. The only common mistake is reversing the three-wire plug, which stops the tach signal and can stall the rotor. Verify the keyed connector orientation before powering on.

Kohokohdat

  • Compact 20 mm blower fits tight CPU coolers
  • 5 V / 0.11 W draw keeps power use low
  • 3-wire connector enables speed monitoring
  • Ball bearing ensures durable rotation
  • Non-LED black design suits any build

Tekniset tiedot

BrandZyvpee
SeriesMF20060V3-1C02C-G99
ModelMF20060V3-1C02C-G99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions20*6MM

Kysymyksiä tästä tuotteesta

How much power does the 0.11 W rating translate to inside a build?

At 5 V the 0.11 W rating means the blower draws a very small current that most motherboard headers or fan controllers can supply without issue.

What does the 3-wire connection allow for speed control?

The three wires carry power, ground and a tachometer signal so the system can monitor RPM, but PWM speed control is not supported on this connector.

Will the 20 mm by 6 mm frame fit my CPU cooler mounting holes?

The blower measures 20 mm square and 6 mm thick, so it only fits coolers or brackets designed for that exact 20×6 mm footprint.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.