Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small black square 40 by 28 millimetre 12 volt case fan with three pins

Zyvpee

Zyvpee PMD1204PQBX-A 40×28 mm 12 V 8.0 W 3-pin case fan

SKU CH-A8YP-NTSGM

40 × 28 mm 12 V ball-bearing case fan drawing 8.0 W with a 3-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Ball bearing for reliable long-term operation
  • 12 V 8.0 W power draw suits server and switch cooling
  • 40 mm × 28 mm frame fits tight 4 cm mounting spaces
  • 3-pin connector enables speed monitoring
  • Black finish with no LED keeps builds clean

Compact 40 × 28 mm server fan

The Zyvpee PMD1204PQBX-A is a 12 V DC case fan built for tight server and switch chassis. Its 40 mm frame and 28 mm depth suit 1 U racks and small-form-factor appliances where airflow must fit a narrow slot. Ball-bearing construction targets continuous duty in always-on environments.

8.0 W power draw defines thermal headroom

At 8.0 W the fan moves enough air for typical CPU cooler or switch ASIC loads in a 4028 footprint. It will not satisfy high-density GPU trays or multi-core server CPUs that demand greater static pressure. Installers should verify the chassis airflow curve matches this single-fan specification.

Three-pin connector is the integration gate

The 3-pin header delivers power and tachometer feedback without PWM control. Boards lacking a 3-pin fan header or requiring 4-pin PWM regulation cannot use this unit directly. Buyers needing variable-speed control or a different connector must select another model.

Kohokohdat

  • Ball bearing for reliable long-term operation
  • 12 V 8.0 W power draw suits server and switch cooling
  • 40 mm × 28 mm frame fits tight 4 cm mounting spaces
  • 3-pin connector enables speed monitoring
  • Black finish with no LED keeps builds clean

Tekniset tiedot

BrandZyvpee
SeriesPMD1204PQBX-A
ModelPMD1204PQBX-A
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesServer Cooling
Dimensions40*28MM

Kysymyksiä tästä tuotteesta

Will the 40 mm × 28 mm frame fit the same mounting holes as my existing 40 mm server fans?

Yes, the 40 mm square frame matches standard 40 mm mounting spacing, so it aligns with the holes used by typical 40 mm server or switch fans.

How can I confirm the ball-bearing motor is running correctly after installation?

Listen for smooth, steady rotation without rattling; the 3-pin connector lets the motherboard report RPM in BIOS or monitoring software so you can verify speed.

Does the package include mounting screws or a 3-pin to 4-pin adapter, or must I buy them separately?

The fan ships with only the 3-pin connector attached; mounting screws and any PWM adapters are not included and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.