Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120 by 38 millimetre case fan with three wires

Zyvpee

Zyvpee PSD1212PMB1 120x38mm 12V 21W 3-pin case fan

SKU CH-KHGW-7YQVT

120 mm by 38 mm case fan with ball bearing, 12 V 21 W power draw and 3-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • High airflow from 12V 21W motor
  • 38 mm thick frame fits dense heatsinks
  • Ball bearing runs quietly for years
  • 3-pin connector works with most motherboards
  • Non-LED black design keeps builds clean

120 mm 38 mm ball-bearing case fan

The Zyvpee PSD1212PMB1 is a 120 mm by 38 mm case fan that runs on 12 V and draws 21 W through a three-wire connector. It uses a ball bearing and has no LED lighting. The black frame suits server power supplies and CPU coolers that need high airflow in a standard 120 mm mounting pattern.

Suited for server chassis

Builders who need a 38 mm thick fan with a three-pin power lead for direct motherboard or backplane connection will find this model compatible. Buyers who require PWM speed control via a four-pin header or who want addressable RGB illumination should look at other options.

Three-pin 12 V 21 W power connector

The sole specification that decides fitment is the three-wire 12 V connector rated at 21 W; it delivers full-speed operation without PWM signalling. Verify that your cooler or chassis provides a matching three-pin header and can supply the stated wattage before purchasing.

Kohokohdat

  • High airflow from 12V 21W motor
  • 38 mm thick frame fits dense heatsinks
  • Ball bearing runs quietly for years
  • 3-pin connector works with most motherboards
  • Non-LED black design keeps builds clean

Tekniset tiedot

BrandZyvpee
SeriesPSD1212PMB1
ModelPSD1212PMB1
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesPower Case Fan
Dimensions120*38MM

Kysymyksiä tästä tuotteesta

Does the Zyvpee PSD1212PMB1 include mounting screws or a power adapter in the box?

The fan ships as the unit only; mounting screws and any adapter cables are not included and must be sourced separately.

The model is listed as 12V 21W — is there a lower-power variant of the PSD1212PMB1 I should consider instead?

Only the 12V 21W version is offered under the PSD1212PMB1 series; no alternative wattage or voltage models exist for this part number.

What does the 21W rating mean for airflow and noise once the fan is installed in a server chassis?

The 21W draw at 12V indicates a high-speed ball-bearing design built for server power supplies, delivering strong static pressure at the cost of higher acoustic output.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.