Zyvpee
Zyvpee RUNDA 5CM 12V .23A 2-Pin 50x20mm case fan
50 mm square case fan with 20 mm depth, 12 V 0.23 A two-pin power and dual-ball bearing
- TypeCase Fan
- Bearing Type2 Ball
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Dimensions50*20mm
- Compact 50 mm frame fits tight builds
- Dual ball bearing extends operational life
- 12 V 0.23 A draw keeps power use low
- Simple 2-pin connector eases installation
- Non-LED black design suits stealth systems
Compact 50 mm case fan for tight builds
The Zyvpee RUNDA 5CM is a 12 V, 0.23 A DC fan measuring 50 mm square and 20 mm thick. It uses a two-pin power connector and non-LED black frame. The two-ball bearing is suited to continuous operation in small chassis or peripheral cooling roles.
Two-pin connector fixes speed at full voltage
This fan has no PWM wire, so it runs at a constant rate whenever the 12 V rail is live. Builders who need variable speed control or motherboard monitoring must choose a three- or four-pin model instead.
Simple two-wire fit in standard 50 mm mounts
The 50 mm hole pattern matches common small-fan brackets and heatsink clips. Ensure the header supplies 12 V; a 5 V header will not spin the motor. The bare two-pin plug may need an adapter if the board only offers keyed three-pin sockets.
Kohokohdat
- Compact 50 mm frame fits tight builds
- Dual ball bearing extends operational life
- 12 V 0.23 A draw keeps power use low
- Simple 2-pin connector eases installation
- Non-LED black design suits stealth systems
Tekniset tiedot
| Brand | Zyvpee |
|---|---|
| Series | RUNDA 5CM |
| Model | RUNDA 5CM |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 50*20mm |
Kysymyksiä tästä tuotteesta
What does the 0.23 A current draw mean for my power supply?
At 12 V the fan pulls 0.23 A, adding only a small load that any standard PSU can handle without issue.
What does the 2‑pin connector allow me to control?
The 2‑pin connector supplies constant 12 V power; speed control is not supported, so the fan runs at full speed whenever the system is on.
Will the 50 mm by 20 mm frame fit my case’s fan mounts?
The square frame measures 50 mm per side and is 20 mm thick, matching standard 50 mm mounting holes in compact cases.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001051BTC
Varastossa