Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm by 38mm case fan with two-pin power connector

Zyvpee

Zyvpee WFB1212HE 120mm 38mm 2 Pin case fan

SKU CH-S00T-P33BD

120 mm by 38 mm case fan with ball bearing and 2-pin 12 V power connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCase Fan
  • 120 mm diameter fits standard case mounts
  • 38 mm thickness moves more air through dense meshes
  • Ball bearing reduces friction for longer service life
  • 12 V 0.60 A draw keeps power demand low
  • 2-pin connector works with any 12 V header

Zyvpee WFB1212HE 120mm case fan

The Zyvpee WFB1212HE is a 120mm case fan built for system cooling in standard chassis mounts. It targets builders who need a 38mm thick unit with a two-pin power connector for direct DC voltage control. The black frame and non-LED design suit professional or low-profile builds without lighting distractions.

Ball bearing thermals and 12V 0.60A draw

A ball bearing supports continuous rotation while the 12V 0.60A rating defines the electrical load under normal operation. The 12038 form factor moves air through restrictive layouts such as dense heatsinks or drive cages. Acoustic output follows the bearing type and motor current without added fan-speed circuitry.

Replaces 120mm 38mm two-pin fans

This unit fits existing mounts that require the 120 by 38 millimetre footprint and a two-wire interface. The jump is worth it when the original fan has failed or when a ball bearing replacement is preferred over sleeve alternatives. Builders needing PWM control or LED illumination should look elsewhere.

Kohokohdat

  • 120 mm diameter fits standard case mounts
  • 38 mm thickness moves more air through dense meshes
  • Ball bearing reduces friction for longer service life
  • 12 V 0.60 A draw keeps power demand low
  • 2-pin connector works with any 12 V header

Tekniset tiedot

Brand3ccooler.com
SeriesWFB1212HE
ModelWFB1212HE
TypeCase Fan
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCase Fan
Dimensions120*38mm

Kysymyksiä tästä tuotteesta

How do I connect the 2 pin power connector on the WFB1212HE?

Align the two pins with the motherboard or fan-controller header and press straight down; the keyed shroud prevents reverse insertion, which is the step most builders miss.

What maintenance does the ball bearing in the WFB1212HE require?

Ball bearings are sealed and need no lubrication; if noise or vibration appears after long service, replace the entire fan unit.

At 0.60 A draw, what thermal limit appears first during continuous operation?

The motor winding temperature rises until the internal thermal protector trips, shutting the fan off until it cools.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.