Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green DDR3 ECC registered DIMM modules in anti-static packaging

A-Tech

A-Tech 32GB (4x8GB) DDR3 1866 ECC RDIMM 1Rx4 1.5V server RAM

SKU CH-7H2E-0JWPS

A 32 GB quad-channel DDR3 1866 kit with ECC registered DIMMs for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1866 ECC RDIMM modules built for registered server and workstation boards. Each module runs at 1.5 V with CL13 latency and a single-rank x4 layout. The quad-channel pack is intended for multi-socket systems that require registered error-correcting memory.

Steady throughput under registered ECC load

Registered buffering and on-die ECC keep data integrity intact during continuous multi-threaded workloads such as virtualisation hosts or database engines. Single-rank x4 organisation allows all four DIMMs to populate a channel without exceeding typical rank limits, sustaining bandwidth over long runs rather than short bursts.

Verify DDR3 registered DIMM support first

Confirm the motherboard accepts 240-pin DDR3 RDIMMs at 1.5 V and can address 32 GB across four slots in quad-channel mode. Systems limited to unbuffered UDIMMs or to a different DDR generation will not post with these modules. Check the vendor memory-qualified list for exact population rules.

Istaknuto

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Specifikacije

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-14900R
Capacity32GB (4 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How much power does this 1.5V DDR3 1866 kit draw when the server runs continuously?

Each module operates at the standard DDR3 voltage of 1.50V; total system draw depends on the platform and workload rather than the memory alone.

What must my motherboard provide to run this quad-channel 240-pin ECC RDIMM kit?

The board needs four DDR3 240-pin slots, a memory controller that supports registered ECC DIMMs, and BIOS that can initialise 1Rx4 modules at 1866 MHz.

Can I mix these 1Rx4 registered sticks with older unbuffered DDR3 DIMMs I already own?

No — registered and unbuffered DDR3 cannot be used together, and the memory controller must be configured for one type exclusively.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.