Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR3 ECC registered DIMM modules in anti-static packaging

A-Tech

A-Tech 32GB (4x8GB) DDR3 1866 ECC RDIMM 1Rx4 1.5V server RAM

SKU CH-7H2E-0JWPS

A 32 GB quad-channel DDR3 1866 kit with ECC registered DIMMs for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1866 ECC RDIMM modules built for registered server and workstation boards. Each module runs at 1.5 V with CL13 latency and a single-rank x4 layout. The quad-channel pack is intended for multi-socket systems that require registered error-correcting memory.

Steady throughput under registered ECC load

Registered buffering and on-die ECC keep data integrity intact during continuous multi-threaded workloads such as virtualisation hosts or database engines. Single-rank x4 organisation allows all four DIMMs to populate a channel without exceeding typical rank limits, sustaining bandwidth over long runs rather than short bursts.

Verify DDR3 registered DIMM support first

Confirm the motherboard accepts 240-pin DDR3 RDIMMs at 1.5 V and can address 32 GB across four slots in quad-channel mode. Systems limited to unbuffered UDIMMs or to a different DDR generation will not post with these modules. Check the vendor memory-qualified list for exact population rules.

Přednosti

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Specifikace

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-14900R
Capacity32GB (4 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much power does this 1.5V DDR3 1866 kit draw when the server runs continuously?

Each module operates at the standard DDR3 voltage of 1.50V; total system draw depends on the platform and workload rather than the memory alone.

What must my motherboard provide to run this quad-channel 240-pin ECC RDIMM kit?

The board needs four DDR3 240-pin slots, a memory controller that supports registered ECC DIMMs, and BIOS that can initialise 1Rx4 modules at 1866 MHz.

Can I mix these 1Rx4 registered sticks with older unbuffered DDR3 DIMMs I already own?

No — registered and unbuffered DDR3 cannot be used together, and the memory controller must be configured for one type exclusively.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.