Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR3 ECC registered DIMM modules in anti-static packaging

A-Tech

A-Tech 32GB (4x8GB) DDR3 1866 ECC RDIMM 1Rx4 1.5V server RAM

SKU CH-7H2E-0JWPS

A 32 GB quad-channel DDR3 1866 kit with ECC registered DIMMs for servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1866 ECC RDIMM modules built for registered server and workstation boards. Each module runs at 1.5 V with CL13 latency and a single-rank x4 layout. The quad-channel pack is intended for multi-socket systems that require registered error-correcting memory.

Steady throughput under registered ECC load

Registered buffering and on-die ECC keep data integrity intact during continuous multi-threaded workloads such as virtualisation hosts or database engines. Single-rank x4 organisation allows all four DIMMs to populate a channel without exceeding typical rank limits, sustaining bandwidth over long runs rather than short bursts.

Verify DDR3 registered DIMM support first

Confirm the motherboard accepts 240-pin DDR3 RDIMMs at 1.5 V and can address 32 GB across four slots in quad-channel mode. Systems limited to unbuffered UDIMMs or to a different DDR generation will not post with these modules. Check the vendor memory-qualified list for exact population rules.

Høydepunkter

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput for heavy workloads
  • ECC registered design detects and corrects memory errors automatically
  • Single-rank 1Rx4 organisation optimises signal integrity on populated channels
  • 5 V standard voltage ensures compatibility with DDR3 server platforms

Spesifikasjoner

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 1Rx4 PC3-14900R
Capacity32GB (4 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How much power does this 1.5V DDR3 1866 kit draw when the server runs continuously?

Each module operates at the standard DDR3 voltage of 1.50V; total system draw depends on the platform and workload rather than the memory alone.

What must my motherboard provide to run this quad-channel 240-pin ECC RDIMM kit?

The board needs four DDR3 240-pin slots, a memory controller that supports registered ECC DIMMs, and BIOS that can initialise 1Rx4 modules at 1866 MHz.

Can I mix these 1Rx4 registered sticks with older unbuffered DDR3 DIMMs I already own?

No — registered and unbuffered DDR3 cannot be used together, and the memory controller must be configured for one type exclusively.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.