Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black 3.5 inch internal card reader with three slots and a 1.64ft cable

EN-Labs

EN-Labs EXTERU3CR3 3.5" Internal Card Reader USB 3.2 Gen 1 1.64ft Cable

SKU CH-RSVB-3Z792

Internal 3.5" bay card reader adds SD, CompactFlash, Memory Stick and xD slots via USB 3.2 Gen 1 header with 1.64ft cable

  • TypeAll-in-one
  • Slots3
  • Installation TypeInternal
  • ColorBlack
  • InterfaceUSB 3.0 w/cable
  • Support - Compact FlashYes
  • 5 Gbps transfer speed via USB 3.2 Gen 1 interface
  • Reads CF I/II, SD, MS Pro/Duo and xD cards
  • Fits standard 3.5" floppy bay for internal installation
  • 64ft cable reaches motherboard USB 19-pin header
  • Compatible with HP Z240 Z440 Z640 Z840 desktops

3.5" Internal Card Reader USB 3.2 Gen 1

The EN-Labs EXTERU3CR3 installs into a 3.5" floppy bay and connects to an internal USB 19-pin header. It provides three slots for CompactFlash I/II, Memory Stick variants and SD/SDHC/SDXC/UHS-I/II cards. A 1.64ft cable links the reader to the motherboard header.

Suits desktops with a free 3.5" bay

Photographers and office users who transfer images from CF, MS or SD media will find the all-in-one layout convenient. Builders without a spare 3.5" bay or an available internal USB 19-pin header cannot install this unit. It does not support MMC or SmartMedia formats.

Fits a 3.5" front panel opening

The 1.64ft cable reaches headers on boards used in HP Z240, Z440, Z640 and Z840 workstations. Using the reader frees external USB ports for other peripherals while adding multi-format card access directly at the front of the chassis.

Istaknuto

  • 5 Gbps transfer speed via USB 3.2 Gen 1 interface
  • Reads CF I/II, SD, MS Pro/Duo and xD cards
  • Fits standard 3.5" floppy bay for internal installation
  • 64ft cable reaches motherboard USB 19-pin header
  • Compatible with HP Z240 Z440 Z640 Z840 desktops

Specifikacije

BrandEN-Labs
ModelEXTERU3CR3
TypeAll-in-one
Slots3
Installation TypeInternal
ColorBlack
InterfaceUSB 3.0 w/cable
Support - Compact FlashYes
Support - Memory StickYes
Support - MMCNo
Support - SDYes
Support - SmartMediaNo
Support - xDYes

Pitanja o ovom artiklu

Do I need a free 19-pin USB header on the motherboard to install this EXTERU3CR3?

Yes, the reader connects through an internal USB 19-pin header; the 1.64ft cable reaches from a 3.5" bay to that header.

Will the CF I/II and SD UHS-I/II slots work if I keep an older USB 3.0 front-panel port on the same header?

The reader runs at USB 3.2 Gen 1 5Gbps; sharing a header with legacy USB 3.0 devices will fall back to the slower link speed.

How can I confirm the reader is operating at 5Gbps after fitting it in a Z240, Z440, Z640 or Z840 bay?

In Device Manager the device should appear as a USB 3.2 Gen 1 controller and transfer rates on a UHS-II card will approach the 5Gbps link ceiling.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.