EN-Labs M.2 NGFF SATA to 2.5" SATA Adapter Enclosure 7mm B/B+M Key 2230 2242 2260 2280
- Black
- Aluminum
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
EN-Labs
Converts a 30x50mm mSATA SSD into a 2.5" SATA drive within a 7mm aluminium enclosure
Size mSATA
The EN-Labs adapter converts a 30x50mm mSATA solid-state drive into a standard 2.5inch SATA form factor. A 7mm aluminium enclosure houses the converter board and provides a direct pass-through for data and power signals. No driver installation is required and the device works with Windows, Linux and Mac operating systems. Transfer rates reach the SATA III 6Gbps limit of the source drive.
Buyers with mini PCIe, M.2 or proprietary Apple solid-state drives cannot use this enclosure. The converter is built exclusively for the mSATA interface and will not accept other connector types. Systems lacking a 2.5inch SATA bay or cable also require a different mounting solution.
Only solid-state drives matching the 30x50mm mSATA specification fit the internal slot. The aluminium housing measures 100x70x7mm and matches the 7mm thickness common in slim notebooks. Compatibility depends entirely on the drive conforming to this exact mSATA size and interface.
| Brand | En-Labs |
|---|---|
| Model | 1 Bay |
| Color | Black |
| Material | Aluminum |
| External Interface | SATA |
| HDD Count Supported | No |
| Number of Bay | 1 |
| Features | Only fit for mSATA SSD,DO NOT support SATA/PATA Mini PCIE SSD, DO NOT support Apple SSD Pls check your SSD type before place order. Support mSATA SSD converted into a standard 2.5" SATA interface. ,fit for mSATA SSD 30x50mm The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip. Transfer speed up to SATA III 6Gbps. Plug and play, and You can connect it to laptop or desktop,Ply and play, not extra driver is needed Compatible with Win 10 / 8 / 7 / VISTA / XP / Linux / Mac. Material:Alumi |
| Size | mSATA |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Yes, the enclosure converts a 30x50mm mSATA drive into a standard 2.5" SATA form factor with a 7mm thickness, matching the bay exactly.
The drive should be recognised by the BIOS and OS without extra drivers, and benchmark tools will show sequential speeds consistent with the SSD's own SATA III 6Gbps rating.
The aluminium enclosure houses the mSATA SSD and presents a direct SATA data and power connector; screws and cables are not included and must be sourced separately.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?