EN-Labs M.2 NGFF SATA to 2.5" SATA Adapter Enclosure 7mm B/B+M Key 2230 2242 2260 2280
- Black
- Aluminum
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
EN-Labs
Converts a 30x50mm mSATA SSD into a 2.5" SATA drive within a 7mm aluminium enclosure
Size mSATA
The EN-Labs adapter converts a 30x50mm mSATA solid-state drive into a standard 2.5inch SATA form factor. A 7mm aluminium enclosure houses the converter board and provides a direct pass-through for data and power signals. No driver installation is required and the device works with Windows, Linux and Mac operating systems. Transfer rates reach the SATA III 6Gbps limit of the source drive.
Buyers with mini PCIe, M.2 or proprietary Apple solid-state drives cannot use this enclosure. The converter is built exclusively for the mSATA interface and will not accept other connector types. Systems lacking a 2.5inch SATA bay or cable also require a different mounting solution.
Only solid-state drives matching the 30x50mm mSATA specification fit the internal slot. The aluminium housing measures 100x70x7mm and matches the 7mm thickness common in slim notebooks. Compatibility depends entirely on the drive conforming to this exact mSATA size and interface.
| Brand | En-Labs |
|---|---|
| Model | 1 Bay |
| Color | Black |
| Material | Aluminum |
| External Interface | SATA |
| HDD Count Supported | No |
| Number of Bay | 1 |
| Features | Only fit for mSATA SSD,DO NOT support SATA/PATA Mini PCIE SSD, DO NOT support Apple SSD Pls check your SSD type before place order. Support mSATA SSD converted into a standard 2.5" SATA interface. ,fit for mSATA SSD 30x50mm The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip. Transfer speed up to SATA III 6Gbps. Plug and play, and You can connect it to laptop or desktop,Ply and play, not extra driver is needed Compatible with Win 10 / 8 / 7 / VISTA / XP / Linux / Mac. Material:Alumi |
| Size | mSATA |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Yes, the enclosure converts a 30x50mm mSATA drive into a standard 2.5" SATA form factor with a 7mm thickness, matching the bay exactly.
The drive should be recognised by the BIOS and OS without extra drivers, and benchmark tools will show sequential speeds consistent with the SSD's own SATA III 6Gbps rating.
The aluminium enclosure houses the mSATA SSD and presents a direct SATA data and power connector; screws and cables are not included and must be sourced separately.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?