EN-Labs M.2 NGFF SATA to 2.5" SATA Adapter Enclosure 7mm B/B+M Key 2230 2242 2260 2280
- Black
- Aluminum
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
EN-Labs
Converts a 30x50mm mSATA SSD into a 2.5" SATA drive within a 7mm aluminium enclosure
Size mSATA
The EN-Labs adapter converts a 30x50mm mSATA solid-state drive into a standard 2.5inch SATA form factor. A 7mm aluminium enclosure houses the converter board and provides a direct pass-through for data and power signals. No driver installation is required and the device works with Windows, Linux and Mac operating systems. Transfer rates reach the SATA III 6Gbps limit of the source drive.
Buyers with mini PCIe, M.2 or proprietary Apple solid-state drives cannot use this enclosure. The converter is built exclusively for the mSATA interface and will not accept other connector types. Systems lacking a 2.5inch SATA bay or cable also require a different mounting solution.
Only solid-state drives matching the 30x50mm mSATA specification fit the internal slot. The aluminium housing measures 100x70x7mm and matches the 7mm thickness common in slim notebooks. Compatibility depends entirely on the drive conforming to this exact mSATA size and interface.
| Brand | En-Labs |
|---|---|
| Model | 1 Bay |
| Color | Black |
| Material | Aluminum |
| External Interface | SATA |
| HDD Count Supported | No |
| Number of Bay | 1 |
| Features | Only fit for mSATA SSD,DO NOT support SATA/PATA Mini PCIE SSD, DO NOT support Apple SSD Pls check your SSD type before place order. Support mSATA SSD converted into a standard 2.5" SATA interface. ,fit for mSATA SSD 30x50mm The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip. Transfer speed up to SATA III 6Gbps. Plug and play, and You can connect it to laptop or desktop,Ply and play, not extra driver is needed Compatible with Win 10 / 8 / 7 / VISTA / XP / Linux / Mac. Material:Alumi |
| Size | mSATA |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Yes, the enclosure converts a 30x50mm mSATA drive into a standard 2.5" SATA form factor with a 7mm thickness, matching the bay exactly.
The drive should be recognised by the BIOS and OS without extra drivers, and benchmark tools will show sequential speeds consistent with the SSD's own SATA III 6Gbps rating.
The aluminium enclosure houses the mSATA SSD and presents a direct SATA data and power connector; screws and cables are not included and must be sourced separately.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?