Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green DDR3 modules with low-profile heat spreaders

G.SKILL

G.SKILL F3-17000CL9Q-16GBSR 16GB (4 x 4GB) DDR3 2133 desktop RAM

SKU CH-X4EH-7A0TY MPN F3-17000CL9Q-16GBSR

Quad-channel 16 GB DDR3 kit rated 2133 MT/s with CL9 9-11-10-28 timings at 1.65 V for Intel LGA1155 and AMD Llano/AM3+ platforms

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2133 (PC3 17000)
  • CAS LatencyCL9
  • Timing9-11-10-28
  • Voltage1.65V
  • ECCNo
  • Quad-channel kit multiplies bandwidth for responsive performance
  • DDR3 2133 speed delivers up to 17GBps per channel
  • CL9 9-11-10-28 timing optimises low-latency operation
  • Intel XMP profiles enable simple overclocking setup
  • Low-profile heat spreader maintains stability under load

Kit Composition

This G.SKILL Sniper Gaming Series kit provides 16GB of DDR3 memory across four 4GB modules. It is built for desktop systems that accept quad-channel DDR3 kits and benefit from the tighter 9-11-10-28 timings at DDR3 2133 speed.

Platform Fit

The modules are validated for Intel LGA1155 and AMD Llano or AM3+ platforms and include Intel XMP profiles for second and third generation Intel Core processors. Builders targeting newer sockets or chipsets that require a different memory generation cannot use this kit.

Deciding Spec

The operating voltage is 1.65V, which is higher than the standard DDR3 voltage; the motherboard and CPU memory controller must support this level for stable operation at the rated DDR3 2133 frequency.

Istaknuto

  • Quad-channel kit multiplies bandwidth for responsive performance
  • DDR3 2133 speed delivers up to 17GBps per channel
  • CL9 9-11-10-28 timing optimises low-latency operation
  • Intel XMP profiles enable simple overclocking setup
  • Low-profile heat spreader maintains stability under load

Specifikacije

BrandG.SKILL
SeriesSniper Gaming Series
ModelF3-17000CL9Q-16GBSR
Capacity16GB (4 x 4GB)
SpeedDDR3 2133 (PC3 17000)
CAS LatencyCL9
Timing9-11-10-28
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
Heat SpreaderYes
FeaturesCompatible with Intel LGA1155 and AMD Llano/AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
Težina pošiljke0.21 kg
Dimenzije pakiranja216 × 135 × 25 mm

Pitanja o ovom artiklu

Will this quad-channel kit work in a dual-channel motherboard?

The kit contains four 4 GB modules. You can install them in a dual-channel board, but the memory controller will run them in dual-channel mode instead of quad-channel.

Does the 1.65 V operating voltage require a specific CPU or chipset?

The modules are rated at 1.65 V. Compatibility depends on the memory controller of your processor and motherboard; check the platform specifications before purchase.

What BIOS setting enables the rated 2133 speed and CL9 timings?

Enable the Intel XMP profile in the BIOS. The kit includes an XMP profile for DDR3 2133 at 9-11-10-28 timings.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.