Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3 modules with low-profile heat spreaders

G.SKILL

G.SKILL F3-17000CL9Q-16GBSR 16GB (4 x 4GB) DDR3 2133 desktop RAM

SKU CH-X4EH-7A0TY MPN F3-17000CL9Q-16GBSR

Quad-channel 16 GB DDR3 kit rated 2133 MT/s with CL9 9-11-10-28 timings at 1.65 V for Intel LGA1155 and AMD Llano/AM3+ platforms

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3 2133 (PC3 17000)
  • CAS LatencyCL9
  • Timing9-11-10-28
  • Voltage1.65V
  • ECCNo
  • Quad-channel kit multiplies bandwidth for responsive performance
  • DDR3 2133 speed delivers up to 17GBps per channel
  • CL9 9-11-10-28 timing optimises low-latency operation
  • Intel XMP profiles enable simple overclocking setup
  • Low-profile heat spreader maintains stability under load

Kit Composition

This G.SKILL Sniper Gaming Series kit provides 16GB of DDR3 memory across four 4GB modules. It is built for desktop systems that accept quad-channel DDR3 kits and benefit from the tighter 9-11-10-28 timings at DDR3 2133 speed.

Platform Fit

The modules are validated for Intel LGA1155 and AMD Llano or AM3+ platforms and include Intel XMP profiles for second and third generation Intel Core processors. Builders targeting newer sockets or chipsets that require a different memory generation cannot use this kit.

Deciding Spec

The operating voltage is 1.65V, which is higher than the standard DDR3 voltage; the motherboard and CPU memory controller must support this level for stable operation at the rated DDR3 2133 frequency.

Pluspunten

  • Quad-channel kit multiplies bandwidth for responsive performance
  • DDR3 2133 speed delivers up to 17GBps per channel
  • CL9 9-11-10-28 timing optimises low-latency operation
  • Intel XMP profiles enable simple overclocking setup
  • Low-profile heat spreader maintains stability under load

Specificaties

BrandG.SKILL
SeriesSniper Gaming Series
ModelF3-17000CL9Q-16GBSR
Capacity16GB (4 x 4GB)
SpeedDDR3 2133 (PC3 17000)
CAS LatencyCL9
Timing9-11-10-28
Voltage1.65V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
Heat SpreaderYes
FeaturesCompatible with Intel LGA1155 and AMD Llano/AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
Verzendgewicht0.21 kg
Pakketafmetingen216 × 135 × 25 mm

Vragen over dit artikel

Will this quad-channel kit work in a dual-channel motherboard?

The kit contains four 4 GB modules. You can install them in a dual-channel board, but the memory controller will run them in dual-channel mode instead of quad-channel.

Does the 1.65 V operating voltage require a specific CPU or chipset?

The modules are rated at 1.65 V. Compatibility depends on the memory controller of your processor and motherboard; check the platform specifications before purchase.

What BIOS setting enables the rated 2133 speed and CL9 timings?

Enable the Intel XMP profile in the BIOS. The kit includes an XMP profile for DDR3 2133 at 9-11-10-28 timings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.