BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Varastossa
G.SKILL
G.SKILL F3-17000CL9Q-16GBSR 16GB (4 x 4GB) DDR3 2133 desktop RAM
Quad-channel 16 GB DDR3 kit rated 2133 MT/s with CL9 9-11-10-28 timings at 1.65 V for Intel LGA1155 and AMD Llano/AM3+ platforms
- Capacity16GB (4 x 4GB)
- SpeedDDR3 2133 (PC3 17000)
- CAS LatencyCL9
- Timing9-11-10-28
- Voltage1.65V
- ECCNo
- Quad-channel kit multiplies bandwidth for responsive performance
- DDR3 2133 speed delivers up to 17GBps per channel
- CL9 9-11-10-28 timing optimises low-latency operation
- Intel XMP profiles enable simple overclocking setup
- Low-profile heat spreader maintains stability under load
Kit Composition
This G.SKILL Sniper Gaming Series kit provides 16GB of DDR3 memory across four 4GB modules. It is built for desktop systems that accept quad-channel DDR3 kits and benefit from the tighter 9-11-10-28 timings at DDR3 2133 speed.
Platform Fit
The modules are validated for Intel LGA1155 and AMD Llano or AM3+ platforms and include Intel XMP profiles for second and third generation Intel Core processors. Builders targeting newer sockets or chipsets that require a different memory generation cannot use this kit.
Deciding Spec
The operating voltage is 1.65V, which is higher than the standard DDR3 voltage; the motherboard and CPU memory controller must support this level for stable operation at the rated DDR3 2133 frequency.
Kohokohdat
- Quad-channel kit multiplies bandwidth for responsive performance
- DDR3 2133 speed delivers up to 17GBps per channel
- CL9 9-11-10-28 timing optimises low-latency operation
- Intel XMP profiles enable simple overclocking setup
- Low-profile heat spreader maintains stability under load
Tekniset tiedot
| Brand | G.SKILL |
|---|---|
| Series | Sniper Gaming Series |
| Model | F3-17000CL9Q-16GBSR |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 2133 (PC3 17000) |
| CAS Latency | CL9 |
| Timing | 9-11-10-28 |
| Voltage | 1.65V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155 and AMD Llano/AM3+ platforms Intel XMP support for 2nd and 3rd Generation Intel Core Processors |
| Lähetyspaino | 0.21 kg |
| Pakkauksen mitat | 216 × 135 × 25 mm |
Kysymyksiä tästä tuotteesta
Will this quad-channel kit work in a dual-channel motherboard?
The kit contains four 4 GB modules. You can install them in a dual-channel board, but the memory controller will run them in dual-channel mode instead of quad-channel.
Does the 1.65 V operating voltage require a specific CPU or chipset?
The modules are rated at 1.65 V. Compatibility depends on the memory controller of your processor and motherboard; check the platform specifications before purchase.
What BIOS setting enables the rated 2133 speed and CL9 timings?
Enable the Intel XMP profile in the BIOS. The kit includes an XMP profile for DDR3 2133 at 9-11-10-28 timings.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00280574BTC
Varastossa
