BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
G.SKILL
Dual-channel 16 GB DDR4 kit running at 4000 MHz with CL15 timings and gold mirrored heatspreaders
This G.SKILL Trident Z Royal kit delivers 16 GB of DDR4 memory in a matched pair of 8 GB modules. It is built for enthusiasts who want high-frequency CL15 performance and a crystalline light bar with eight controllable RGB zones per stick. The gold electroplated heatspreaders use a classic tri-fin design to dissipate heat.
The kit is rated for DDR4 4000 (PC4 32000) at timings of 15-16-16-36 and requires 1.50 V to reach that speed. Achieving the rated frequency and latency depends on the memory controller quality of the CPU and the motherboard's ability to train the memory at high data rates. XMP must be enabled in the firmware to apply the profile automatically.
Verify that your motherboard supports DDR4 4000 via XMP and that the CPU memory controller can sustain the rated speed at 1.50 V. Confirm the board has four DIMM slots if you plan to expand beyond this dual-channel kit later. Ensure your case and CPU cooler clearance accommodate the module height with the crystalline light bar installed.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4000C15D-16GTRG |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL15 |
| Timing | 15-16-16-36 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Gold |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 / Z390 |
| LED Color | RGB |
| Težina pošiljke | 0.23 kg |
| Dimenzije pakiranja | 180 × 137 × 23 mm |
Yes, the kit is a dual-channel DDR4 kit validated for Intel Z590, Z490 and Z390 platforms.
The kit runs at 4000 MT/s with timings of 15-16-16-36 at 1.50 V, which is an XMP profile; enable XMP in the BIOS to apply those settings.
The modules have 8 RGB zones per stick and can be managed via the G.SKILL lighting control software for effects, profiles and per-module sync.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?