Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two gold aluminium DIMMs with crystalline RGB light bars

G.SKILL

G.SKILL F4-4000C15D-16GTRG Trident Z Royal 16GB (2 x 8GB) DDR4 4000 CL15 desktop RAM

SKU CH-SATD-SS4NP MPN F4-4000C15D-16GTRG

Dual-channel 16 GB DDR4 kit running at 4000 MHz with CL15 timings and gold mirrored heatspreaders

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 4000 (PC4 32000)
  • CAS LatencyCL15
  • Timing15-16-16-36
  • Voltage1.50V
  • ECCNo
  • DDR4 4000 speed delivers high bandwidth for demanding workloads
  • CL15 latency with 15-16-16-36 timings reduces response delay in games and apps
  • Dual-channel 16 GB kit (2 x 8 GB) doubles throughput on supported platforms
  • Gold mirrored aluminum heatspreaders conduct heat away from hand-screened ICs
  • Crystalline light bar with 8 RGB zones creates a prismatic lighting effect

Crown-Jewel RGB DDR4 Kit

This G.SKILL Trident Z Royal kit delivers 16 GB of DDR4 memory in a matched pair of 8 GB modules. It is built for enthusiasts who want high-frequency CL15 performance and a crystalline light bar with eight controllable RGB zones per stick. The gold electroplated heatspreaders use a classic tri-fin design to dissipate heat.

DDR4 4000 CL15 Practical Limits

The kit is rated for DDR4 4000 (PC4 32000) at timings of 15-16-16-36 and requires 1.50 V to reach that speed. Achieving the rated frequency and latency depends on the memory controller quality of the CPU and the motherboard's ability to train the memory at high data rates. XMP must be enabled in the firmware to apply the profile automatically.

Before Ordering Checklist

Verify that your motherboard supports DDR4 4000 via XMP and that the CPU memory controller can sustain the rated speed at 1.50 V. Confirm the board has four DIMM slots if you plan to expand beyond this dual-channel kit later. Ensure your case and CPU cooler clearance accommodate the module height with the crystalline light bar installed.

Punti di forza

  • DDR4 4000 speed delivers high bandwidth for demanding workloads
  • CL15 latency with 15-16-16-36 timings reduces response delay in games and apps
  • Dual-channel 16 GB kit (2 x 8 GB) doubles throughput on supported platforms
  • Gold mirrored aluminum heatspreaders conduct heat away from hand-screened ICs
  • Crystalline light bar with 8 RGB zones creates a prismatic lighting effect

Caratteristiche tecniche

BrandG.SKILL
SeriesTrident Z Royal Series
ModelF4-4000C15D-16GTRG
Capacity16GB (2 x 8GB)
SpeedDDR4 4000 (PC4 32000)
CAS LatencyCL15
Timing15-16-16-36
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorGold
Heat SpreaderYes
FeaturesUnique crystalline light bar design.
Mirrored-finish aluminum heatspreaders in gold or silver.
Fluid rainbow wave default lighting effect.
Hand-screened IC & custom 10-layer PCB for improved overclock performance.
Intel XMP 2.0 Support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP
Recommend UseIntel Z590 / Z490 / Z390
LED ColorRGB
Peso di spedizione0.23 kg
Dimensioni del pacco180 × 137 × 23 mm

Domande su questo articolo

Will these modules fit a motherboard with DDR4 slots and an Intel Z590, Z490 or Z390 chipset?

Yes, the kit is a dual-channel DDR4 kit validated for Intel Z590, Z490 and Z390 platforms.

Do I need to enable XMP in the BIOS to reach the rated 4000 speed and CL15 timings?

The kit runs at 4000 MT/s with timings of 15-16-16-36 at 1.50 V, which is an XMP profile; enable XMP in the BIOS to apply those settings.

Is the RGB lighting controllable through motherboard software or only the G.SKILL utility?

The modules have 8 RGB zones per stick and can be managed via the G.SKILL lighting control software for effects, profiles and per-module sync.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.