BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
G.SKILL
Dual-channel 16 GB DDR4 kit running at 4000 MHz with CL15 timings and gold mirrored heatspreaders
This G.SKILL Trident Z Royal kit delivers 16 GB of DDR4 memory in a matched pair of 8 GB modules. It is built for enthusiasts who want high-frequency CL15 performance and a crystalline light bar with eight controllable RGB zones per stick. The gold electroplated heatspreaders use a classic tri-fin design to dissipate heat.
The kit is rated for DDR4 4000 (PC4 32000) at timings of 15-16-16-36 and requires 1.50 V to reach that speed. Achieving the rated frequency and latency depends on the memory controller quality of the CPU and the motherboard's ability to train the memory at high data rates. XMP must be enabled in the firmware to apply the profile automatically.
Verify that your motherboard supports DDR4 4000 via XMP and that the CPU memory controller can sustain the rated speed at 1.50 V. Confirm the board has four DIMM slots if you plan to expand beyond this dual-channel kit later. Ensure your case and CPU cooler clearance accommodate the module height with the crystalline light bar installed.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-4000C15D-16GTRG |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 4000 (PC4 32000) |
| CAS Latency | CL15 |
| Timing | 15-16-16-36 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Gold |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | Intel Z590 / Z490 / Z390 |
| LED Color | RGB |
| Přepravní hmotnost | 0.23 kg |
| Rozměry balení | 180 × 137 × 23 mm |
Yes, the kit is a dual-channel DDR4 kit validated for Intel Z590, Z490 and Z390 platforms.
The kit runs at 4000 MT/s with timings of 15-16-16-36 at 1.50 V, which is an XMP profile; enable XMP in the BIOS to apply those settings.
The modules have 8 RGB zones per stick and can be managed via the G.SKILL lighting control software for effects, profiles and per-module sync.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?