G.SKILL F5-5200J4040A16GX2-RS5W 32GB DDR5 5200 desktop RAM
- 32GB (2 x 16GB)
- DDR5 5200
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
G.SKILL
A 32 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 timings and a 33 mm low-profile heatspreader
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
This 32 GB kit contains two 16 GB unbuffered DIMMs rated for DDR5 6000 with CL32 timings. It targets DIY builders and enthusiasts who want a validated XMP 3.0 profile on Intel 600 series platforms. The matte black heatspreaders sit at a low 33 mm height.
The low-profile design clears oversized CPU coolers and fits small-form-factor cases. Users needing registered or ECC memory should choose a different product. The kit runs at 1.35 V and boots at SPD speeds until XMP 3.0 is enabled in BIOS.
The decisive specification is the DDR5 6000 speed grade with 32-38-38-96 timings at 1.35 V. Verify that your motherboard and CPU support this data rate and voltage before purchase.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-6000J3238F16GX2-RS5K |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38-96 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 600 Series |
| Težina pošiljke | 0.11 kg |
| Dimenzije pakiranja | 216 × 142 × 16 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
The modules measure 33mm tall, so they clear most large air coolers; check your cooler's RAM clearance spec to be certain.
Enable the Intel XMP 3.0 profile in BIOS; the kit will then run at DDR5 6000 with 32-38-38-96 timings at 1.35V.
Yes, it is validated for Intel 600 series platforms and will boot at SPD defaults before XMP is enabled.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?