Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two black low-profile DDR5 modules with matte heatspreaders, 33mm tall

G.SKILL

G.SKILL F5-6000J3238F16GX2-RS5K 32GB (2×16GB) DDR5 6000 desktop RAM

SKU CH-D5X2-4VYNG MPN F5-6000J3238F16GX2-RS5K

A 32 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 timings and a 33 mm low-profile heatspreader

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL32
  • Timing32-38-38-96
  • Voltage1.35V

Capacity 32GB (2 x 16GB)

Speed DDR5 6000 (PC5 48000)

CAS Latency CL32

Color Black

  • Low-profile 33mm height fits compact builds and large CPU coolers
  • Dual-channel 32GB kit delivers 6000 MT/s DDR5 bandwidth
  • CL32 32-38-38-96 timings reduce latency for responsive performance
  • 35V operation balances speed with efficient power draw
  • Intel XMP 3.0 profile enables one-click overclocking on 600-series platforms

Ripjaws S5 DDR5 6000 dual-channel kit

This 32 GB kit contains two 16 GB unbuffered DIMMs rated for DDR5 6000 with CL32 timings. It targets DIY builders and enthusiasts who want a validated XMP 3.0 profile on Intel 600 series platforms. The matte black heatspreaders sit at a low 33 mm height.

Suits compact builds and large coolers.

The low-profile design clears oversized CPU coolers and fits small-form-factor cases. Users needing registered or ECC memory should choose a different product. The kit runs at 1.35 V and boots at SPD speeds until XMP 3.0 is enabled in BIOS.

288-pin DDR5 6000 CL32 at 1.35 V

The decisive specification is the DDR5 6000 speed grade with 32-38-38-96 timings at 1.35 V. Verify that your motherboard and CPU support this data rate and voltage before purchase.

Høydepunkter

  • Low-profile 33mm height fits compact builds and large CPU coolers
  • Dual-channel 32GB kit delivers 6000 MT/s DDR5 bandwidth
  • CL32 32-38-38-96 timings reduce latency for responsive performance
  • 35V operation balances speed with efficient power draw
  • Intel XMP 3.0 profile enables one-click overclocking on 600-series platforms

Spesifikasjoner

BrandG.SKILL
SeriesRipjaws S5 Series
ModelF5-6000J3238F16GX2-RS5K
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-38-38-96
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
Features"Performance DDR5 memory designed for DIY and PC enthusiasts.
Featuring a 33mm Low-profile module height design
Intel XMP 3.0 Support.
The memory kit will boot at the SPD speed when BIOS settings are at default.
For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues.
Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit.
Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard
Recommend UseIntel 600 Series
Fraktvekt0.11 kg
Pakkestørrelse216 × 142 × 16 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 33mm low-profile height fit under my large CPU cooler?

The modules measure 33mm tall, so they clear most large air coolers; check your cooler's RAM clearance spec to be certain.

What BIOS setting enables the rated 6000 speed and CL32 timings?

Enable the Intel XMP 3.0 profile in BIOS; the kit will then run at DDR5 6000 with 32-38-38-96 timings at 1.35V.

Is this dual-channel kit compatible with a 600-series Intel motherboard?

Yes, it is validated for Intel 600 series platforms and will boot at SPD defaults before XMP is enabled.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.