G.SKILL F5-5200J4040A16GX2-RS5W 32GB DDR5 5200 desktop RAM
- 32GB (2 x 16GB)
- DDR5 5200
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
G.SKILL
A 32 GB dual-channel DDR5 kit running at 6000 MT/s with CL32 timings and a 33 mm low-profile heatspreader
Capacity 32GB (2 x 16GB)
Speed DDR5 6000 (PC5 48000)
This 32 GB kit contains two 16 GB unbuffered DIMMs rated for DDR5 6000 with CL32 timings. It targets DIY builders and enthusiasts who want a validated XMP 3.0 profile on Intel 600 series platforms. The matte black heatspreaders sit at a low 33 mm height.
The low-profile design clears oversized CPU coolers and fits small-form-factor cases. Users needing registered or ECC memory should choose a different product. The kit runs at 1.35 V and boots at SPD speeds until XMP 3.0 is enabled in BIOS.
The decisive specification is the DDR5 6000 speed grade with 32-38-38-96 timings at 1.35 V. Verify that your motherboard and CPU support this data rate and voltage before purchase.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws S5 Series |
| Model | F5-6000J3238F16GX2-RS5K |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38-96 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | "Performance DDR5 memory designed for DIY and PC enthusiasts. Featuring a 33mm Low-profile module height design Intel XMP 3.0 Support. The memory kit will boot at the SPD speed when BIOS settings are at default. For best results, please use memory modules from the same memory kit only. Please do not install memory modules from different kits, as it may result in system stability issues. Enable XMP profile in the BIOS to reach up to the rated XMP overclock speed of the memory kit. Reaching the rated XMP overclock speed and system stability depends on the capability of the motherboard |
| Recommend Use | Intel 600 Series |
| Teža pošiljke | 0.11 kg |
| Velikost pošiljke | 216 × 142 × 16 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The modules measure 33mm tall, so they clear most large air coolers; check your cooler's RAM clearance spec to be certain.
Enable the Intel XMP 3.0 profile in BIOS; the kit will then run at DDR5 6000 with 32-38-38-96 timings at 1.35V.
Yes, it is validated for Intel 600 series platforms and will boot at SPD defaults before XMP is enabled.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?