GUDGA
GUDGA GXF-S-1TB-2280-PRO 1TB internal SSD
A 1TB internal SSD with 7200MB/s read and 6500MB/s write speeds using 3D TLC NAND and a PCIe 4.0 x4 NVME interface
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe 1.4
- Fast game loads from 7200MB/s read speed
- Quick file saves with 6500MB/s write speed
- Reliable storage using 3D TLC NAND
- High bandwidth via PCIe 4.0 x4
- Large 1TB capacity for games and apps
PCIe 4.0 x4 NVME SSD
The GUDGA GXF-S-1TB-2280-PRO is a 1TB internal solid state drive built on 3D TLC NAND. It connects through a PCIe 4.0 x4 interface using the NVME 1.4 protocol and a 75-pin M.2 2280 connector. Sequential reads reach 7200MB/s and writes reach 6500MB/s.
Who this suits
This drive fits desktops, laptops and PS5 consoles that accept a single-sided M.2 2280 module without a heatsink. The 2.20mm height clears tight slots. Buyers needing a factory-fitted heatsink or a drive rated for sustained write workloads beyond 600TBW should look at other models.
Deciding specification
The PCIe 4.0 x4 NVME interface delivers 7200MB/s read and 6500MB/s write throughput. If the host platform only supports PCIe 3.0 the drive will still work but cannot reach these speeds.
Istaknuto
- Fast game loads from 7200MB/s read speed
- Quick file saves with 6500MB/s write speed
- Reliable storage using 3D TLC NAND
- High bandwidth via PCIe 4.0 x4
- Large 1TB capacity for games and apps
Specifikacije
| Brand | GUDGA |
|---|---|
| Series | GXF-S-2280-PRO |
| Model | GXF-S-1TB-2280-PRO |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Connector | 75 Pins |
| Max Sequential Read | 7200MB/s |
| Max Sequential Write | 6500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 600TB |
| MTBF | 2,000,000 hours |
| Ready Boost | Yes |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +85°C |
| Height | 2.20mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 26g |
| Manufacturer Recertified | Yes |
Pitanja o ovom artiklu
Does my motherboard need a PCIe 4.0 x4 M.2 slot to use the GUDGA GXF-S-1TB-2280-PRO?
Yes, the drive connects through a 75-pin M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4; an older PCIe 3.0 slot will work but caps the 7200MB/s read and 6500MB/s write speeds.
Will the GUDGA GXF-S-1TB-2280-PRO run alongside my existing PCIe 3.0 NVMe drive without slowing it down?
Each drive negotiates its own link, so the GUDGA GXF-S-1TB-2280-PRO will operate at PCIe 4.0 x4 while your older drive stays at PCIe 3.0 x4; neither forces the other to drop lanes.
How can I confirm the GUDGA GXF-S-1TB-2280-PRO is delivering its rated 7200MB/s read and 6500MB/s write after installation?
Run a sequential benchmark such as CrystalDiskMark on an empty partition; sustained reads near 7200MB/s and writes near 6500MB/s with the drive temperature staying below 70°C confirm it is working as intended.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
