Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green rectangular circuit board with gold edge connector and black controller chip, 22 by 80 millimetres, no heatsink

GUDGA

GUDGA GXF-S-1TB-2280-PRO 1TB internal SSD

SKU CH-QGK9-3GF8X

A 1TB internal SSD with 7200MB/s read and 6500MB/s write speeds using 3D TLC NAND and a PCIe 4.0 x4 NVME interface

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Capacity1TB
  • Memory Components3D TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe 1.4
  • Fast game loads from 7200MB/s read speed
  • Quick file saves with 6500MB/s write speed
  • Reliable storage using 3D TLC NAND
  • High bandwidth via PCIe 4.0 x4
  • Large 1TB capacity for games and apps

PCIe 4.0 x4 NVME SSD

The GUDGA GXF-S-1TB-2280-PRO is a 1TB internal solid state drive built on 3D TLC NAND. It connects through a PCIe 4.0 x4 interface using the NVME 1.4 protocol and a 75-pin M.2 2280 connector. Sequential reads reach 7200MB/s and writes reach 6500MB/s.

Who this suits

This drive fits desktops, laptops and PS5 consoles that accept a single-sided M.2 2280 module without a heatsink. The 2.20mm height clears tight slots. Buyers needing a factory-fitted heatsink or a drive rated for sustained write workloads beyond 600TBW should look at other models.

Deciding specification

The PCIe 4.0 x4 NVME interface delivers 7200MB/s read and 6500MB/s write throughput. If the host platform only supports PCIe 3.0 the drive will still work but cannot reach these speeds.

Points forts

  • Fast game loads from 7200MB/s read speed
  • Quick file saves with 6500MB/s write speed
  • Reliable storage using 3D TLC NAND
  • High bandwidth via PCIe 4.0 x4
  • Large 1TB capacity for games and apps

Caractéristiques

BrandGUDGA
SeriesGXF-S-2280-PRO
ModelGXF-S-1TB-2280-PRO
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Capacity1TB
Memory Components3D TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe 1.4
Connector75 Pins
Max Sequential Read7200MB/s
Max Sequential Write6500MB/s
Seek Time0.1 ms
Terabytes Written (TBW)600TB
MTBF2,000,000 hours
Ready BoostYes
HeatSinkwithout HeatSink
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +85°C
Height2.20mm
Width22mm
Depth80mm
Weight26g
Manufacturer RecertifiedYes

Questions sur cet article

Does my motherboard need a PCIe 4.0 x4 M.2 slot to use the GUDGA GXF-S-1TB-2280-PRO?

Yes, the drive connects through a 75-pin M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4; an older PCIe 3.0 slot will work but caps the 7200MB/s read and 6500MB/s write speeds.

Will the GUDGA GXF-S-1TB-2280-PRO run alongside my existing PCIe 3.0 NVMe drive without slowing it down?

Each drive negotiates its own link, so the GUDGA GXF-S-1TB-2280-PRO will operate at PCIe 4.0 x4 while your older drive stays at PCIe 3.0 x4; neither forces the other to drop lanes.

How can I confirm the GUDGA GXF-S-1TB-2280-PRO is delivering its rated 7200MB/s read and 6500MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark on an empty partition; sustained reads near 7200MB/s and writes near 6500MB/s with the drive temperature staying below 70°C confirm it is working as intended.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.