We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and black controller chip, 22 by 80 millimetres, no heatsink

GUDGA

GUDGA GXF-S-1TB-2280-PRO 1TB internal SSD

SKU CH-QGK9-3GF8X

A 1TB internal SSD with 7200MB/s read and 6500MB/s write speeds using 3D TLC NAND and a PCIe 4.0 x4 NVME interface

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Capacity1TB
  • Memory Components3D TLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe 1.4
  • Fast game loads from 7200MB/s read speed
  • Quick file saves with 6500MB/s write speed
  • Reliable storage using 3D TLC NAND
  • High bandwidth via PCIe 4.0 x4
  • Large 1TB capacity for games and apps

PCIe 4.0 x4 NVME SSD

The GUDGA GXF-S-1TB-2280-PRO is a 1TB internal solid state drive built on 3D TLC NAND. It connects through a PCIe 4.0 x4 interface using the NVME 1.4 protocol and a 75-pin M.2 2280 connector. Sequential reads reach 7200MB/s and writes reach 6500MB/s.

Who this suits

This drive fits desktops, laptops and PS5 consoles that accept a single-sided M.2 2280 module without a heatsink. The 2.20mm height clears tight slots. Buyers needing a factory-fitted heatsink or a drive rated for sustained write workloads beyond 600TBW should look at other models.

Deciding specification

The PCIe 4.0 x4 NVME interface delivers 7200MB/s read and 6500MB/s write throughput. If the host platform only supports PCIe 3.0 the drive will still work but cannot reach these speeds.

Highlights

  • Fast game loads from 7200MB/s read speed
  • Quick file saves with 6500MB/s write speed
  • Reliable storage using 3D TLC NAND
  • High bandwidth via PCIe 4.0 x4
  • Large 1TB capacity for games and apps

Specifications

BrandGUDGA
SeriesGXF-S-2280-PRO
ModelGXF-S-1TB-2280-PRO
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Capacity1TB
Memory Components3D TLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe 1.4
Connector75 Pins
Max Sequential Read7200MB/s
Max Sequential Write6500MB/s
Seek Time0.1 ms
Terabytes Written (TBW)600TB
MTBF2,000,000 hours
Ready BoostYes
HeatSinkwithout HeatSink
Operating Temperature0°C ~ +70°C
Storage Temperature-20°C ~ +85°C
Height2.20mm
Width22mm
Depth80mm
Weight26g
Manufacturer RecertifiedYes

Questions about this item

Does my motherboard need a PCIe 4.0 x4 M.2 slot to use the GUDGA GXF-S-1TB-2280-PRO?

Yes, the drive connects through a 75-pin M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4; an older PCIe 3.0 slot will work but caps the 7200MB/s read and 6500MB/s write speeds.

Will the GUDGA GXF-S-1TB-2280-PRO run alongside my existing PCIe 3.0 NVMe drive without slowing it down?

Each drive negotiates its own link, so the GUDGA GXF-S-1TB-2280-PRO will operate at PCIe 4.0 x4 while your older drive stays at PCIe 3.0 x4; neither forces the other to drop lanes.

How can I confirm the GUDGA GXF-S-1TB-2280-PRO is delivering its rated 7200MB/s read and 6500MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark on an empty partition; sustained reads near 7200MB/s and writes near 6500MB/s with the drive temperature staying below 70°C confirm it is working as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.