NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Kingston Technology Corp.
4GB DDR3 ECC unbuffered server memory running at 1600 MHz with CL11 latency and 1.35V operation
This 4GB DDR3-1600 module delivers error-correcting code protection in an unbuffered 240-pin form factor. It operates at 1.35V with a CAS latency of CL11 and conforms to the PC3-12800 standard. The single stick is designed for server platforms that require ECC memory without registered signalling.
The module is validated for specific Supermicro systems including A+ 1042G-LTF and several 2022TG and H8QGL motherboard variants. Builders working with consumer desktop boards or platforms that demand registered DIMMs should look elsewhere. Systems requiring higher capacities per slot will also need a different part.
The 240-pin DDR3 interface combined with ECC unbuffered operation is the single specification that determines compatibility. Only motherboards wired for unbuffered ECC DDR3 at 1.35V can accept this module. Verify your platform supports this exact configuration before purchasing.
| Brand | Kingston |
|---|---|
| Model | KVR16LE11S8/4 |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Features | w/TS SR x4 |
| Težina pošiljke | 0.02 kg |
| Dimenzije pakiranja | 169 × 55 × 13 mm |
This module is a 240-pin DDR3 DIMM rated for 1600 MHz at 1.35V; it fits any server board with DDR3 slots that support that voltage and speed.
Unbuffered and registered ECC memory cannot be mixed in the same server; all DIMMs must use the same signal-processing type for the system to function.
Enter the BIOS or use a tool such as CPU-Z to confirm the memory reports 1600 MHz, CAS latency 11 and ECC active.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?