Phanteks PH-F140M25_G2_DBK01 140mm case fan 1800 RPM 101.78 CFM
- 1 Fan
- No Controller
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Phanteks
A 140 mm PWM case fan delivering 104.62 CFM at 36.57 dB(A) with daisy-chain cabling
Fan Size 140mm
Style Regular / No DRGB
Model M25
Option Single Fan
Precrtane verzije postoje, ali nisu dostupne ovdje.
The Phanteks M25-140 is a single 140mm by 25mm case fan built for high static pressure. It targets builders who need strong airflow through dense fin stacks such as radiators or heatsinks. The hydraulic bearing and wide PWM range suit both quiet daily use and demanding cooling loads. It connects via a standard 4-pin header and includes no lighting.
At lower RPM settings the fan moves air through restrictive filters and radiators while keeping motor and bearing noise low. The supplier rates noise at 36.57 dB(A) and airflow at 104.62 CFM when the fan runs at its 1800 RPM maximum. PWM control allows precise adjustment between 500 and 1800 RPM so acoustic output matches the thermal demand. A single 4-pin connector powers the unit.
Under continuous high-load operation the fan maintains its rated speed to deliver consistent cooling for powerful components. The hydraulic bearing is designed for durability during prolonged use at elevated RPM. Daisy-chain cabling lets multiple fans share one PWM signal, though each additional unit adds to the total current draw on that single header. Buyers who need more than one fan per header should verify their motherboard's current limit.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Fan, Black |
| Part Number | PH-F140M25_PWM_BBK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Težina pošiljke | 0.27 kg |
| Dimenzije pakiranja | 203 × 142 × 89 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Plug the first fan's 4-pin connector into the CPU or chassis fan header, then link additional fans using the daisy-chain leads; the motherboard controls all fans from that single header.
The sealed hydraulic bearing is maintenance-free; replace the fan only if noise rises above 36.57 dB(A) or airflow drops below 104.62 CFM after years of continuous use.
When the curve hits 1800 RPM the fan cannot spin faster, so any extra heat must be handled by adding more fans or improving case airflow instead.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?