Phanteks PH-F140M25_G2_DBK01 140mm case fan 1800 RPM 101.78 CFM
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Phanteks
A 140 mm PWM case fan delivering 104.62 CFM at 36.57 dB(A) with daisy-chain cabling
Fan Size 140mm
Style Regular / No DRGB
Model M25
Option Single Fan
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Phanteks M25-140 is a single 140mm by 25mm case fan built for high static pressure. It targets builders who need strong airflow through dense fin stacks such as radiators or heatsinks. The hydraulic bearing and wide PWM range suit both quiet daily use and demanding cooling loads. It connects via a standard 4-pin header and includes no lighting.
At lower RPM settings the fan moves air through restrictive filters and radiators while keeping motor and bearing noise low. The supplier rates noise at 36.57 dB(A) and airflow at 104.62 CFM when the fan runs at its 1800 RPM maximum. PWM control allows precise adjustment between 500 and 1800 RPM so acoustic output matches the thermal demand. A single 4-pin connector powers the unit.
Under continuous high-load operation the fan maintains its rated speed to deliver consistent cooling for powerful components. The hydraulic bearing is designed for durability during prolonged use at elevated RPM. Daisy-chain cabling lets multiple fans share one PWM signal, though each additional unit adds to the total current draw on that single header. Buyers who need more than one fan per header should verify their motherboard's current limit.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Fan, Black |
| Part Number | PH-F140M25_PWM_BBK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Prepravná hmotnosť | 0.27 kg |
| Rozmery balenia | 203 × 142 × 89 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Plug the first fan's 4-pin connector into the CPU or chassis fan header, then link additional fans using the daisy-chain leads; the motherboard controls all fans from that single header.
The sealed hydraulic bearing is maintenance-free; replace the fan only if noise rises above 36.57 dB(A) or airflow drops below 104.62 CFM after years of continuous use.
When the curve hits 1800 RPM the fan cannot spin faster, so any extra heat must be handled by adding more fans or improving case airflow instead.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?