Phanteks PH-F140M25R_G2_DBK01 140mm 25mm Reversed Blade ARGB Case Fan
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Phanteks
A 140 mm hydraulic-bearing case fan delivering 104.62 CFM at up to 1800 RPM with DRGB lighting and daisy-chain cabling
Fan Size 140mm
Style Regular
Option Single Fan
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Phanteks M25-140 D-RGB is a single 140mm case fan with a 25mm thick frame and hydraulic bearing. It targets builders who need high static pressure for radiators or dense mesh filters. PWM control spans 500 to 1800 RPM, delivering 104.62 CFM airflow at a maximum noise level of 36.57 dB(A). DRGB lighting is included with a motherboard adapter for synchronization.
This fan suits systems using liquid-cooling radiators or cases with restrictive dust filters where pressure matters. The hydraulic bearing and wide PWM range support both low-speed quiet running and high-speed thermal headroom. Builders who prioritise absolute minimum noise above cooling capacity should look at alternatives optimised for lower RPM operation. The daisy-chain cabling simplifies multi-fan installations.
The headline specification is 104.62 CFM airflow generated at 1800 RPM, which determines whether this fan meets the thermal demands of a given radiator or heatsink. This figure, combined with the 25mm thickness and 4-pin PWM connector, confirms fit and performance for high-density cooling arrays. Verify case clearance for 140mm mounting points before purchase.
| Brand | Phanteks |
|---|---|
| Model | M25-140 D-RGB Fan, Black |
| Part Number | PH-F140M25_DRGB_PWM_BK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | White Matte blade / Black Fan Frame |
| LED | DRGB |
| Prepravná hmotnosť | 0.18 kg |
| Rozmery balenia | 140 × 140 × 25 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
A standard 4-pin PWM header lets the motherboard vary the speed between 500 and 1800 RPM.
Yes, the included Daisy-Chain cable links multiple fans so one PWM signal drives all of them.
Connect the DRGB lead to a compatible motherboard header; the LEDs should illuminate and respond to the board's lighting software.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?