Phanteks PH-F140M25_G2_DBK01 140mm case fan 1800 RPM 101.78 CFM
- 1 Fan
- No Controller
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Phanteks
A 140 mm PWM case fan delivering 104.62 CFM at 36.57 dB(A) with daisy-chain cabling
Fan Size 140mm
Style Regular / No DRGB
Model M25
Option Single Fan
Зачертаните версии съществуват, но не се предлагат тук.
The Phanteks M25-140 is a single 140mm by 25mm case fan built for high static pressure. It targets builders who need strong airflow through dense fin stacks such as radiators or heatsinks. The hydraulic bearing and wide PWM range suit both quiet daily use and demanding cooling loads. It connects via a standard 4-pin header and includes no lighting.
At lower RPM settings the fan moves air through restrictive filters and radiators while keeping motor and bearing noise low. The supplier rates noise at 36.57 dB(A) and airflow at 104.62 CFM when the fan runs at its 1800 RPM maximum. PWM control allows precise adjustment between 500 and 1800 RPM so acoustic output matches the thermal demand. A single 4-pin connector powers the unit.
Under continuous high-load operation the fan maintains its rated speed to deliver consistent cooling for powerful components. The hydraulic bearing is designed for durability during prolonged use at elevated RPM. Daisy-chain cabling lets multiple fans share one PWM signal, though each additional unit adds to the total current draw on that single header. Buyers who need more than one fan per header should verify their motherboard's current limit.
| Brand | Phanteks |
|---|---|
| Model | M25-140 Fan, Black |
| Part Number | PH-F140M25_PWM_BBK01 |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500-1800±10% RPM |
| Air Flow | 104.62 CFM |
| Noise Level | 36.57 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No DRGB |
| Тегло на пратката | 0.27 kg |
| Размери на опаковката | 203 × 142 × 89 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Plug the first fan's 4-pin connector into the CPU or chassis fan header, then link additional fans using the daisy-chain leads; the motherboard controls all fans from that single header.
The sealed hydraulic bearing is maintenance-free; replace the fan only if noise rises above 36.57 dB(A) or airflow drops below 104.62 CFM after years of continuous use.
When the curve hits 1800 RPM the fan cannot spin faster, so any extra heat must be handled by adding more fans or improving case airflow instead.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?