Solidigm D7-PS1030 6.4TB U.2 15mm PCIe 5.0 x4 enterprise SSD SB5PH27E064TOP1
- U.2 15mm
- 6.4TB
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Solidigm
12.8TB U.2 15mm PCIe 5.0 enterprise SSD delivering 14500 MBps read, 9300 MBps write and 3 DWPD endurance with FIPS security
Option 12.8TB U.2 FIPS
The Solidigm D7-PS1030 is a 12.8TB enterprise solid-state drive built for data-centre servers and high-density storage arrays. It uses 176L TLC 3D NAND and a PCIe 5.0 x4 interface to deliver sustained performance in write-intensive workloads. The drive carries FIPS security validation and a 3 DWPD endurance rating. It targets IT teams that need large capacity with consistent low latency.
The single specification that decides fit is the PCIe 5.0 x4 U.2 15mm connector. The host system must provide a compatible U.2 backplane or riser with PCIe 5.0 signalling and 15mm drive bays. Without that physical and electrical match the drive cannot be installed or will fall back to lower speeds. Verify the platform slot specification before purchase.
At 12.8TB the drive comfortably holds large databases, virtualisation images and analytics datasets while sustaining up to 14500 MBps sequential read and 9300 MBps sequential write. Random performance reaches 2750000 read IOPS and 800000 write IOPS at 4K blocks. The 70 PBW write budget supports the rated 3 DWPD across the warranty period; workloads exceeding that write volume will consume endurance faster than planned.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E128TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 12.8TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 9300 MBps |
| 4KB Random Read | 2750000 IOPS (4K Blocks) |
| 4KB Random Write | 800000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 70 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 165g +/- 10g |
| Težina pošiljke | 0.17 kg |
| Dimenzije pakiranja | 140 × 110 × 17 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
It enables rapid loading of large datasets and fast boot times for virtualised workloads, limited by the PCIe 5.0 x4 link and the host controller.
The x4 lane width sets a theoretical ceiling near 14500 MBps read and 9300 MBps write; actual speeds depend on CPU lane allocation and thermal headroom.
It needs a 2.5-inch U.2 hot-swap bay with 15mm vertical clearance and a compatible backplane connector for power and data.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?