Solidigm D7-PS1030 6.4TB U.2 15mm PCIe 5.0 x4 enterprise SSD SB5PH27E064TOP1
- U.2 15mm
- 6.4TB
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Solidigm
12.8TB U.2 15mm PCIe 5.0 enterprise SSD delivering 14500 MBps read, 9300 MBps write and 3 DWPD endurance with FIPS security
Option 12.8TB U.2 FIPS
The Solidigm D7-PS1030 is a 12.8TB enterprise solid-state drive built for data-centre servers and high-density storage arrays. It uses 176L TLC 3D NAND and a PCIe 5.0 x4 interface to deliver sustained performance in write-intensive workloads. The drive carries FIPS security validation and a 3 DWPD endurance rating. It targets IT teams that need large capacity with consistent low latency.
The single specification that decides fit is the PCIe 5.0 x4 U.2 15mm connector. The host system must provide a compatible U.2 backplane or riser with PCIe 5.0 signalling and 15mm drive bays. Without that physical and electrical match the drive cannot be installed or will fall back to lower speeds. Verify the platform slot specification before purchase.
At 12.8TB the drive comfortably holds large databases, virtualisation images and analytics datasets while sustaining up to 14500 MBps sequential read and 9300 MBps sequential write. Random performance reaches 2750000 read IOPS and 800000 write IOPS at 4K blocks. The 70 PBW write budget supports the rated 3 DWPD across the warranty period; workloads exceeding that write volume will consume endurance faster than planned.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E128TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 12.8TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 9300 MBps |
| 4KB Random Read | 2750000 IOPS (4K Blocks) |
| 4KB Random Write | 800000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 70 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 165g +/- 10g |
| Fraktvikt | 0.17 kg |
| Paketstorlek | 140 × 110 × 17 mm |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
It enables rapid loading of large datasets and fast boot times for virtualised workloads, limited by the PCIe 5.0 x4 link and the host controller.
The x4 lane width sets a theoretical ceiling near 14500 MBps read and 9300 MBps write; actual speeds depend on CPU lane allocation and thermal headroom.
It needs a 2.5-inch U.2 hot-swap bay with 15mm vertical clearance and a compatible backplane connector for power and data.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?