Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black standalone SATA duplicator with 20 vertical slots and LCD screen

Systor

Systor SYS2020HS-DP 1:20 SATA Duplicator & Sanitizer 9GB/min 150MB/sec 128MB Buffer 800W

SKU CH-K5YA-6RS5C

Standalone SATA duplicator copies or sanitises up to 20 drives at 9.0 GB/min with 128 MB buffer and DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 20
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 20

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

Standalone SATA duplicator with 20 targets

The Systor SYS2020HS-DP is a standalone hard-drive duplicator and sanitizer that copies one SATA source to up to 20 SATA targets at once. It accepts both 3.5 and 2.5 inch drives without adapters and operates without a host computer. An LCD screen reports progress and status for each port.

Suited for high-volume SATA cloning

IT departments, data-recovery labs and forensic teams that need simultaneous duplication of many SATA drives will benefit from the 150 MB/sec throughput and the built-in DoD 5220.22-M sanitization modes. Buyers who require interfaces other than SATA or who need network-attached operation should consider a different platform.

20 target ports define the maximum simultaneous

The unit provides twenty hot-swap SATA slots fed by dual 400 W supplies totalling 800 W. This port count is the hard limit on how many drives can be cloned or erased in a single session.

Istaknuto

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

Specifikacije

BrandSystor
ModelSYS2020HS-DP
TypeHard Drive Duplicator
Target1 to 20
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How do I install the SATA drives into the 20 target slots and what step is often missed?

Insert each 2.5 or 3.5 drive directly into a hot-swap slot; the step often missed is ensuring the drive seats fully so the SATA connector engages before starting a copy or erase job.

What maintenance or replacement will the duplicator need later?

The 40 mm rear fans and per-port outtake fans collect dust; clean them periodically and replace any fan that becomes noisy or stops spinning to maintain airflow.

What limit appears first during sustained high-speed duplication?

The 128 MB buffer and 150 MB/sec transfer rate set the sustained throughput ceiling; long sessions are also bounded by the dual 400 W power supplies and thermal limits.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.