저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black standalone SATA duplicator with 20 vertical slots and LCD screen

Systor

Systor SYS2020HS-DP 1:20 SATA Duplicator & Sanitizer 9GB/min 150MB/sec 128MB Buffer 800W

SKU CH-K5YA-6RS5C

Standalone SATA duplicator copies or sanitises up to 20 drives at 9.0 GB/min with 128 MB buffer and DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 20
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 20

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

Standalone SATA duplicator with 20 targets

The Systor SYS2020HS-DP is a standalone hard-drive duplicator and sanitizer that copies one SATA source to up to 20 SATA targets at once. It accepts both 3.5 and 2.5 inch drives without adapters and operates without a host computer. An LCD screen reports progress and status for each port.

Suited for high-volume SATA cloning

IT departments, data-recovery labs and forensic teams that need simultaneous duplication of many SATA drives will benefit from the 150 MB/sec throughput and the built-in DoD 5220.22-M sanitization modes. Buyers who require interfaces other than SATA or who need network-attached operation should consider a different platform.

20 target ports define the maximum simultaneous

The unit provides twenty hot-swap SATA slots fed by dual 400 W supplies totalling 800 W. This port count is the hard limit on how many drives can be cloned or erased in a single session.

주요 특징

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

사양

BrandSystor
ModelSYS2020HS-DP
TypeHard Drive Duplicator
Target1 to 20
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install the SATA drives into the 20 target slots and what step is often missed?

Insert each 2.5 or 3.5 drive directly into a hot-swap slot; the step often missed is ensuring the drive seats fully so the SATA connector engages before starting a copy or erase job.

What maintenance or replacement will the duplicator need later?

The 40 mm rear fans and per-port outtake fans collect dust; clean them periodically and replace any fan that becomes noisy or stops spinning to maintain airflow.

What limit appears first during sustained high-speed duplication?

The 128 MB buffer and 150 MB/sec transfer rate set the sustained throughput ceiling; long sessions are also bounded by the dual 400 W power supplies and thermal limits.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.