저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black standalone SATA duplicator with nine hot-swap slots and LCD screen

Systor

Systor 1-to-9 SATA Duplicator SYS209HS-DP Dual Port Hot Swap

SKU CH-YNM4-M2C56

Standalone SATA duplicator copies one source to nine targets at 150 MB/s with DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 09

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • 1-to-9 target ports copy up to nine drives simultaneously
  • 150 MB/s transfer rate — 9.0 GB per minute
  • DoD 5220.22-M compliant sanitisation with multiple erase modes
  • Hot-swap bays accept 2.5" and 3.5" SATA drives without adapters

1-to-9 SATA Duplicator with Dual-Port Hot Swap

This standalone duplicator copies or sanitises up to nine SATA hard drives or solid-state drives at once. It accepts both 2.5 and 3.5 inch form factors without adapters and operates without a host computer. A built-in LCD screen reports progress and status for each port.

Upgrades from single-bay copiers

IT teams and data-recovery labs that need to duplicate or wipe many drives per shift will cut cycle time by running nine targets in parallel. The jump is worth it when throughput matters more than occasional single-drive tasks and when DoD 5220.22-M compliant sanitisation is required on site.

128 MB buffer and 150 MB/s peak transfer per port

The buffer absorbs burst traffic so sustained copies run close to the rated 9.0 GB/min across all active bays. Whole-media and system-and-files modes are supported, but very large drives or heavily fragmented sources will extend each session beyond the nominal rate.

주요 특징

  • Standalone operation — no computer or software required
  • 1-to-9 target ports copy up to nine drives simultaneously
  • 150 MB/s transfer rate — 9.0 GB per minute
  • DoD 5220.22-M compliant sanitisation with multiple erase modes
  • Hot-swap bays accept 2.5" and 3.5" SATA drives without adapters

사양

BrandSystor
Model662712130996
TypeHard Drive Duplicator
Target1 to 9
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What drive sizes fit the duplicator bays without adapters?

The duplicator accepts 2.5 inch and 3.5 inch SATA drives directly in its hot-swap slots.

How is the duplicator installed and what step is commonly missed?

Connect the 115/230 V 300 W power supply, insert source and target drives into the slots, then select copy mode on the LCD before starting.

What maintenance will the duplicator need over time?

The 40 mm rear and per-port cooling fans should be kept clear of dust; the 128 MB buffer and LCD require no user service.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.