我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone SATA duplicator with nine hot-swap slots and LCD screen

Systor

Systor 1-to-9 SATA Duplicator SYS209HS-DP Dual Port Hot Swap

SKU CH-YNM4-M2C56

Standalone SATA duplicator copies one source to nine targets at 150 MB/s with DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 09

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • 1-to-9 target ports copy up to nine drives simultaneously
  • 150 MB/s transfer rate — 9.0 GB per minute
  • DoD 5220.22-M compliant sanitisation with multiple erase modes
  • Hot-swap bays accept 2.5" and 3.5" SATA drives without adapters

1-to-9 SATA Duplicator with Dual-Port Hot Swap

This standalone duplicator copies or sanitises up to nine SATA hard drives or solid-state drives at once. It accepts both 2.5 and 3.5 inch form factors without adapters and operates without a host computer. A built-in LCD screen reports progress and status for each port.

Upgrades from single-bay copiers

IT teams and data-recovery labs that need to duplicate or wipe many drives per shift will cut cycle time by running nine targets in parallel. The jump is worth it when throughput matters more than occasional single-drive tasks and when DoD 5220.22-M compliant sanitisation is required on site.

128 MB buffer and 150 MB/s peak transfer per port

The buffer absorbs burst traffic so sustained copies run close to the rated 9.0 GB/min across all active bays. Whole-media and system-and-files modes are supported, but very large drives or heavily fragmented sources will extend each session beyond the nominal rate.

商品特色

  • Standalone operation — no computer or software required
  • 1-to-9 target ports copy up to nine drives simultaneously
  • 150 MB/s transfer rate — 9.0 GB per minute
  • DoD 5220.22-M compliant sanitisation with multiple erase modes
  • Hot-swap bays accept 2.5" and 3.5" SATA drives without adapters

商品規格

BrandSystor
Model662712130996
TypeHard Drive Duplicator
Target1 to 9
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What drive sizes fit the duplicator bays without adapters?

The duplicator accepts 2.5 inch and 3.5 inch SATA drives directly in its hot-swap slots.

How is the duplicator installed and what step is commonly missed?

Connect the 115/230 V 300 W power supply, insert source and target drives into the slots, then select copy mode on the LCD before starting.

What maintenance will the duplicator need over time?

The 40 mm rear and per-port cooling fans should be kept clear of dust; the 128 MB buffer and LCD require no user service.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。