我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone SATA duplicator with 23 hot-swap slots and LCD screen

Systor

Systor 1:23 SATA Duplicator & Sanitizer 23 Target 36GB/min 600MB/sec 128MB Buffer 800W

SKU CH-4V5D-DMQ27

Standalone SATA duplicator copies and sanitises up to 23 drives at 36 GB/min with DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 23
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 23

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies 23 drives at once with 1 to 23 target ports
  • 36 GB per minute throughput at 600 MB per second data rate
  • 128 MB buffer smooths simultaneous multi-drive transfers
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Standalone operation needs no host computer or software

1-to-23 SATA duplicator for high-volume cloning

The Systor unit copies one source drive to up to 23 targets simultaneously at 36 GB per minute. It handles 3.5-inch and 2.5-inch SATA hard drives or solid-state drives without adapters. Operation is standalone with an LCD screen, so no host computer or software is required.

SATA interface caps throughput at 600 MB per second

Each target port shares the 600 MB/sec aggregate bandwidth, so sustained speed per drive falls as more bays are populated. The duplicator offers two copy modes: Systems and Files copies only used sectors to save time, while Whole Media duplicates every sector including empty space. DoD 5220.22-M compliant erase is available for sanitisation.

Check that every drive uses a native SATA connector

Drives with other interfaces will not fit the hot-swap slots and no adapters are included. The dual 400 W power supplies accept 115 V or 230 V at 50 Hz or 60 Hz, so verify local mains voltage compatibility. Ensure the target drives are equal to or larger than the source capacity for successful duplication.

商品特色

  • Copies 23 drives at once with 1 to 23 target ports
  • 36 GB per minute throughput at 600 MB per second data rate
  • 128 MB buffer smooths simultaneous multi-drive transfers
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Standalone operation needs no host computer or software

商品規格

BrandSystor
TypeHard Drive Duplicator
Target1 to 23
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I pick the 23-target model or a smaller duplicator?

This unit copies to 23 drives at once; choose it when you need that many targets in a single run.

What does the 36 GB per minute rate mean when I am copying drives?

It peaks at 36 GB per minute, so actual time depends on each drive's own write speed.

Is the SATA link fast enough to keep up with the 600 MB/s spec?

The SATA interface handles the stated 600 MB/s transfer rate for compatible drives.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。