Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone SATA duplicator with 23 hot-swap slots and LCD screen

Systor

Systor 1:23 SATA Duplicator & Sanitizer 23 Target 36GB/min 600MB/sec 128MB Buffer 800W

SKU CH-4V5D-DMQ27

Standalone SATA duplicator copies and sanitises up to 23 drives at 36 GB/min with DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 23
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 23

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies 23 drives at once with 1 to 23 target ports
  • 36 GB per minute throughput at 600 MB per second data rate
  • 128 MB buffer smooths simultaneous multi-drive transfers
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Standalone operation needs no host computer or software

1-to-23 SATA duplicator for high-volume cloning

The Systor unit copies one source drive to up to 23 targets simultaneously at 36 GB per minute. It handles 3.5-inch and 2.5-inch SATA hard drives or solid-state drives without adapters. Operation is standalone with an LCD screen, so no host computer or software is required.

SATA interface caps throughput at 600 MB per second

Each target port shares the 600 MB/sec aggregate bandwidth, so sustained speed per drive falls as more bays are populated. The duplicator offers two copy modes: Systems and Files copies only used sectors to save time, while Whole Media duplicates every sector including empty space. DoD 5220.22-M compliant erase is available for sanitisation.

Check that every drive uses a native SATA connector

Drives with other interfaces will not fit the hot-swap slots and no adapters are included. The dual 400 W power supplies accept 115 V or 230 V at 50 Hz or 60 Hz, so verify local mains voltage compatibility. Ensure the target drives are equal to or larger than the source capacity for successful duplication.

Kohokohdat

  • Copies 23 drives at once with 1 to 23 target ports
  • 36 GB per minute throughput at 600 MB per second data rate
  • 128 MB buffer smooths simultaneous multi-drive transfers
  • DoD 5220.22-M compliant sanitisation erases data beyond recovery
  • Standalone operation needs no host computer or software

Tekniset tiedot

BrandSystor
TypeHard Drive Duplicator
Target1 to 23
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 23-target model or a smaller duplicator?

This unit copies to 23 drives at once; choose it when you need that many targets in a single run.

What does the 36 GB per minute rate mean when I am copying drives?

It peaks at 36 GB per minute, so actual time depends on each drive's own write speed.

Is the SATA link fast enough to keep up with the 600 MB/s spec?

The SATA interface handles the stated 600 MB/s transfer rate for compatible drives.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.