Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Systor 1 to 9 SATA drive duplicator with LCD screen

Systor

Systor SYS609DP 1:9 SATA Hard Drive Duplicator & Sanitizer

SKU CH-5MC1-7DBYE

Standalone SATA duplicator copies one drive to nine targets at 600 MB/s and erases to DoD 5220.22-M standard

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Buffer Memory128MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 09

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copy up to nine drives at once with 1:9 target ports
  • 600 MB/sec transfer rate moves large datasets quickly
  • Standalone LCD operation needs no host computer attached
  • DoD 5220.22-M compliant erase removes data securely
  • Hot-swap bays accept 2.5 and 3.5 inch drives directly

SATA duplicator with nine target bays

This standalone SATA duplicator copies or sanitises up to nine drives at once from a single source. It handles 2.5 and 3.5 inch SATA hard drives and solid-state drives without adapters. Operation is controlled through an LCD screen and requires no host computer or software.

IT teams cloning SATA fleets.

The unit suits IT departments, forensic labs and data-recovery services that need to duplicate or erase multiple SATA drives in parallel. It offers two copy modes: systems-and-files or whole-drive sector-by-sector. Buyers who only process one drive at a time or who need to work with non-SATA interfaces will not benefit from the nine-target design.

DoD 5220.22-M compliant sanitisation

The duplicator meets the DoD 5220.22-M standard for multi-pass data erasure, providing verified sanitisation for sensitive environments. It sustains up to 600 MB per second and 36 GB per minute transfer rates. A 128 MB buffer and 250 W power supply support continuous standalone operation.

Kohokohdat

  • Copy up to nine drives at once with 1:9 target ports
  • 600 MB/sec transfer rate moves large datasets quickly
  • Standalone LCD operation needs no host computer attached
  • DoD 5220.22-M compliant erase removes data securely
  • Hot-swap bays accept 2.5 and 3.5 inch drives directly

Tekniset tiedot

BrandSystor
TypeHard Drive Duplicator
Target1 to 9
Buffer Memory128MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
FeaturesEach duplication session takes just 2 to 4 minutes for master CD's and 5 to 8 minutes for master DVD's.* Any disc with copy protection or encryption, such as retail DVDs or rental discs, will not burn on our duplicators.
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What type of drives must I already have to use the Systor SYS609DP duplicator?

You need SATA hard drives or solid-state drives in 2.5 or 3.5 form factors; no adapters are required for either size.

Can the duplicator clone a legacy SATA drive alongside newer SATA drives in the same session?

Yes, the copier works with any brand, operating system or format of SATA drive, so older and newer SATA disks can be duplicated together.

How can I verify the duplicator is copying at the rated speed after setup?

Watch the LCD screen during a session; it shows live progress so you can confirm the transfer is running at up to 600 MB/sec.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.