Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone SATA duplicator with nine drive slots and LCD screen

Systor

Systor SYS309DP 1:9 SATA Duplicator & Sanitizer 18GB/min 300W

SKU CH-VXEF-BZDC4

Standalone SATA duplicator copies one source to nine targets at 18 GB per minute and includes DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 09

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies up to nine drives at once
  • 18 GB per minute transfer speed
  • Standalone operation with no computer needed
  • DoD 5220.22-M compliant data sanitisation
  • Supports 2.5" and 3.5" drives without adapters

1:9 SATA Duplicator & Sanitizer

The Systor SYS309DP is a standalone duplicator that copies one SATA source drive to up to nine SATA targets at 18 GB per minute. It handles both 3.5" and 2.5" hard drives and solid-state drives without adapters and includes an LCD screen for status and menu control.

Who this suits and who should look elsewhere

IT departments, forensic labs and data-recovery shops that need simultaneous, verified clones of SATA media will benefit from the whole-media and system-and-files copy modes plus DoD 5220.22-M compliant sanitisation. Buyers who require interfaces other than SATA or more than nine target bays should consider alternative equipment.

18 GB per minute copy speed

The sustained 18 GB per minute (300 MB/s) transfer rate determines how quickly large drives are duplicated or erased, making it the key figure for evaluating whether throughput meets your batch-processing windows.

Kohokohdat

  • Copies up to nine drives at once
  • 18 GB per minute transfer speed
  • Standalone operation with no computer needed
  • DoD 5220.22-M compliant data sanitisation
  • Supports 2.5" and 3.5" drives without adapters

Tekniset tiedot

BrandSystor
ModelSYS309DP
TypeHard Drive Duplicator
Target1 to 9
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 40 mm rear fans and per-port outtake fans need cleaning or replacement after extended use?

The unit uses 40 mm rear fans and a dedicated outtake fan on each of the nine ports to maintain airflow; dust buildup on these fans is the primary maintenance item and they can be replaced with standard 40 mm units if they wear out.

What limits sustained throughput when copying to all nine targets at once?

The shared 300 MB/s (18 GB/min) bandwidth is divided across active ports, so the aggregate transfer rate becomes the bottleneck before any single drive reaches its own speed ceiling.

How much heat and noise should I expect when the duplicator runs all day at full load?

A 300 W power supply feeding nine drives plus 40 mm rear and per-port fans produces noticeable fan noise and warm exhaust air; the built-in vents and forced-air design keep internal temperatures stable during continuous operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.