Systor SYS207HS-DP 1:7 SATA Duplicator & Sanitizer 9.0GB/min 150MB/sec 128MB buffer 300W
- Hard Drive Duplicat…
- 1 to 7
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Systor
Standalone SATA duplicator copies one source to nine targets at 150 MB/s with DoD 5220.22-M sanitisation
DATA TRANSFER RATE 9.0GB/min [150MB/sec]
This standalone duplicator copies or sanitises up to nine SATA hard drives or solid-state drives at once. It accepts both 2.5 and 3.5 inch form factors without adapters and operates without a host computer. A built-in LCD screen reports progress and status for each port.
IT teams and data-recovery labs that need to duplicate or wipe many drives per shift will cut cycle time by running nine targets in parallel. The jump is worth it when throughput matters more than occasional single-drive tasks and when DoD 5220.22-M compliant sanitisation is required on site.
The buffer absorbs burst traffic so sustained copies run close to the rated 9.0 GB/min across all active bays. Whole-media and system-and-files modes are supported, but very large drives or heavily fragmented sources will extend each session beyond the nominal rate.
| Brand | Systor |
|---|---|
| Model | 662712130996 |
| Type | Hard Drive Duplicator |
| Target | 1 to 9 |
| Buffer Memory | 128 MB |
| Data Transfer Rate | 9.0GB/min (150MB/sec) |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Features | MULTIPLE COPY FUNCTIONS System and Files: Copies only the system and files area of the source HDD, saving overall copy time Whole Media: Copies the entire content on the source HDD device, including both the data and empty spaces Copy + Compare: Ensures an accurate duplication between the source HDD and target HDD(s) MULTIPLE ERASE FUNCTIONS Quick Erase: Only erases the table of content/index of the target HDD's file system Full Erase: Erases the entire content and whole sectors of the target HDD DoD Erase: Compliant with U.S.A. Department of Defense standard, this option fully erase |
| Power Supply | 115/230 V, 50/60 Hz, 300 W |
| Package Contents | see pictures for details |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The duplicator accepts 2.5 inch and 3.5 inch SATA drives directly in its hot-swap slots.
Connect the 115/230 V 300 W power supply, insert source and target drives into the slots, then select copy mode on the LCD before starting.
The 40 mm rear and per-port cooling fans should be kept clear of dust; the 128 MB buffer and LCD require no user service.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม