Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone SATA duplicator with 20 vertical slots and LCD screen

Systor

Systor SYS2020HS-DP 1:20 SATA Duplicator & Sanitizer 9GB/min 150MB/sec 128MB Buffer 800W

SKU CH-K5YA-6RS5C

Standalone SATA duplicator copies or sanitises up to 20 drives at 9.0 GB/min with 128 MB buffer and DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 20
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 20

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

Standalone SATA duplicator with 20 targets

The Systor SYS2020HS-DP is a standalone hard-drive duplicator and sanitizer that copies one SATA source to up to 20 SATA targets at once. It accepts both 3.5 and 2.5 inch drives without adapters and operates without a host computer. An LCD screen reports progress and status for each port.

Suited for high-volume SATA cloning

IT departments, data-recovery labs and forensic teams that need simultaneous duplication of many SATA drives will benefit from the 150 MB/sec throughput and the built-in DoD 5220.22-M sanitization modes. Buyers who require interfaces other than SATA or who need network-attached operation should consider a different platform.

20 target ports define the maximum simultaneous

The unit provides twenty hot-swap SATA slots fed by dual 400 W supplies totalling 800 W. This port count is the hard limit on how many drives can be cloned or erased in a single session.

Priekšrocības

  • Duplicates 20 drives simultaneously from one source
  • 150MB/sec transfer rate with 128MB buffer
  • Standalone operation requires no host computer
  • DoD 5220.22-M compliant multi-pass sanitisation
  • Accepts 2.5 and 3.5 SATA drives without adapters

Specifikācijas

BrandSystor
ModelSYS2020HS-DP
TypeHard Drive Duplicator
Target1 to 20
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the SATA drives into the 20 target slots and what step is often missed?

Insert each 2.5 or 3.5 drive directly into a hot-swap slot; the step often missed is ensuring the drive seats fully so the SATA connector engages before starting a copy or erase job.

What maintenance or replacement will the duplicator need later?

The 40 mm rear fans and per-port outtake fans collect dust; clean them periodically and replace any fan that becomes noisy or stops spinning to maintain airflow.

What limit appears first during sustained high-speed duplication?

The 128 MB buffer and 150 MB/sec transfer rate set the sustained throughput ceiling; long sessions are also bounded by the dual 400 W power supplies and thermal limits.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.