Systor 1:3 SATA Duplicator & Sanitizer 9GB/min 150MB/s 128MB 250W SYS203HS-DP
- Hard Drive Duplicat…
- 1 to 3
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Systor
Standalone SATA duplicator copies or sanitises up to five 2.5 or 3.5 drives at 9.0 GB/min with DoD 5220.22-M erase and hot-swap bays
DATA TRANSFER RATE 9.0GB/min [150MB/sec]
The Systor 1:5 duplicator copies a single source drive to up to five SATA targets at 9.0GB per minute. It handles both 2.5 and 3.5 inch SSDs and HDDs without adapters and operates completely standalone with no host computer or software required. A built-in LCD screen guides every job from copy to erase.
Suits departments that need rapid, simultaneous duplication or secure sanitisation of SATA storage media. The unit supports both System-and-Files and Whole-Media copy modes and meets DoD 5220.22-M wipe standards. Buyers who require interfaces other than SATA or more than five target bays will need a different platform.
The 150 MB per second ceiling sets the maximum speed at which data moves from source to targets, so total job time scales directly with drive capacity. A 128 MB buffer smooths burst traffic during multi-drive sessions. Power input accepts 115 or 230 V at 50 or 60 Hz from the integrated 300 W supply.
| Brand | Systor |
|---|---|
| Model | 662712130989 |
| Type | Hard Drive Duplicator |
| Target | 1 to 5 |
| Buffer Memory | 128 MB |
| Data Transfer Rate | 9.0GB/min (150MB/sec) |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Features | MULTIPLE COPY FUNCTIONS System and Files: Copies only the system and files area of the source HDD, saving overall copy time Whole Media: Copies the entire content on the source HDD device, including both the data and empty spaces Copy + Compare: Ensures an accurate duplication between the source HDD and target HDD(s) MULTIPLE ERASE FUNCTIONS Quick Erase: Only erases the table of content/index of the target HDD's file system Full Erase: Erases the entire content and whole sectors of the target HDD DoD Erase: Compliant with U.S.A. Department of Defense standard, this option fully erase |
| Power Supply | 115/230 V, 50/60 Hz, 300 W |
| Package Contents | see pictures for details |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
It runs standalone with no computer required and uses built-in SATA slots for direct drive insertion.
Yes, both 2.5 and 3.5 inch SATA drives fit the slots without adapters and can be copied together.
The LCD screen reports pass or fail status for each target port after the multi-pass sanitisation cycle completes.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?