暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Systor

Systor 1:5 SATA Hard Drive Duplicator & Sanitizer 9GB/min 150MB/sec Dual Port Hot Swap

SKU CH-AVJH-G9VZT

Standalone SATA duplicator copies or sanitises up to five 2.5 or 3.5 drives at 9.0 GB/min with DoD 5220.22-M erase and hot-swap bays

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone copy and erase with no computer needed
  • 150 MB/s transfer rate duplicates five drives at once
  • DoD 5220.22-M compliant sanitisation removes all data traces
  • Supports 2.5" and 3.5" SATA drives without adapters
  • LCD screen shows progress for system-and-files or whole-media modes

SATA Duplicator for Five Target Drives

The Systor 1:5 duplicator copies a single source drive to up to five SATA targets at 9.0GB per minute. It handles both 2.5 and 3.5 inch SSDs and HDDs without adapters and operates completely standalone with no host computer or software required. A built-in LCD screen guides every job from copy to erase.

For IT Teams Erasing or Cloning SATA Drives

Suits departments that need rapid, simultaneous duplication or secure sanitisation of SATA storage media. The unit supports both System-and-Files and Whole-Media copy modes and meets DoD 5220.22-M wipe standards. Buyers who require interfaces other than SATA or more than five target bays will need a different platform.

150 MB/s Peak Transfer Rate Decides Throughput

The 150 MB per second ceiling sets the maximum speed at which data moves from source to targets, so total job time scales directly with drive capacity. A 128 MB buffer smooths burst traffic during multi-drive sessions. Power input accepts 115 or 230 V at 50 or 60 Hz from the integrated 300 W supply.

特長

  • Standalone copy and erase with no computer needed
  • 150 MB/s transfer rate duplicates five drives at once
  • DoD 5220.22-M compliant sanitisation removes all data traces
  • Supports 2.5" and 3.5" SATA drives without adapters
  • LCD screen shows progress for system-and-files or whole-media modes

仕様

BrandSystor
Model662712130989
TypeHard Drive Duplicator
Target1 to 5
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does this duplicator need a host computer or SATA cables to operate?

It runs standalone with no computer required and uses built-in SATA slots for direct drive insertion.

Can I mix 2.5 and 3.5 inch SATA drives in the same copy session?

Yes, both 2.5 and 3.5 inch SATA drives fit the slots without adapters and can be copied together.

How do I verify a DoD 5220.22-M erase finished correctly on the LCD?

The LCD screen reports pass or fail status for each target port after the multi-pass sanitisation cycle completes.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。