Systor SYS301DP 1:1 SATA Hard Drive Duplicator & Sanitizer
- Hard Drive Duplicat…
- 1 to 1
Systor
A standalone duplicator and sanitizer that copies three SATA drives at 150 MB/s and meets DoD 5220.22-M erasure standards
DATA TRANSFER RATE 9.0GB/min [150MB/sec]
The Systor SYS203HS-DP copies one source drive to three targets without a host computer. It accepts 2.5 and 3.5 inch SATA drives directly in hot-swap slots. An LCD screen shows progress and status during standalone operation.
Two copy modes let you duplicate only system and files or the entire media sector by sector. Sanitisation follows the DoD 5220.22-M standard with multiple-pass overwrite. No software installation is required for any function.
The unit sustains up to 150 MB per second (9.0 GB per minute) across all three target ports. A 128 MB buffer smooths burst transfers during simultaneous cloning. Drives larger than the buffer capacity are handled in streaming passes; very high-capacity arrays will take proportionally longer.
| Brand | Systor |
|---|---|
| Model | 662712130972 |
| Type | Hard Drive Duplicator |
| Target | 1 to 3 |
| Buffer Memory | 128 MB |
| Data Transfer Rate | 9.0GB/min (150MB/sec) |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Features | MULTIPLE COPY FUNCTIONS System and Files: Copies only the system and files area of the source HDD, saving overall copy time Whole Media: Copies the entire content on the source HDD device, including both the data and empty spaces Copy + Compare: Ensures an accurate duplication between the source HDD and target HDD(s) MULTIPLE ERASE FUNCTIONS Quick Erase: Only erases the table of content/index of the target HDD's file system Full Erase: Erases the entire content and whole sectors of the target HDD DoD Erase: Compliant with U.S.A. Department of Defense standard, this option fully erase |
| Power Supply | 115/230 V, 50/60 Hz, 250 W |
| Package Contents | see pictures for details |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The unit uses 40 mm rear fans and a dedicated outtake fan on each drive bay to maintain airflow; dust buildup on these fans is the primary maintenance item, and they can be replaced with standard 40 mm fans if they become noisy or fail.
The 128 MB buffer and the 250 W power supply set the practical ceiling; sustained maximum throughput across all three SATA ports is constrained by buffer capacity and the power budget for three drives plus the duplicator electronics.
Dual 40 mm rear fans and per-bay outtake fans move air continuously; the 250 W supply (115/230 V, 50/60 Hz) powers the duplicator and up to three drives, so heat output and fan noise scale with the number of populated bays and ambient temperature.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?