暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SATA duplicator with five hot-swap drive slots

Systor

Systor 1:5 SATA Hard Drive Duplicator & Sanitizer (SYS105HS-DP)

SKU CH-NPQ3-R5028

Standalone SATA duplicator copies or erases up to five 2.5 or 3.5 drives at 90 MB/s with 128 MB buffer and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Data Transfer RateUp to 90MB/s (Depending on HDD speed)
  • Language SupportEnglish / Spanish / French / Japanese
  • Operating TypeStandalone
  • ConnectorSATA

TARGET SIZE 1 to 05

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

Standalone SATA duplicator & sanitizer

The Systor 1:5 unit copies one source drive to five targets at once without a host PC. It handles both 2.5 and 3.5 SATA disks, including SSDs and HDDs, and runs sector-by-sector duplication plus multi-pass DoD 5220.22-M sanitisation. Menus are available in English, Spanish, French and Japanese.

Transfer ceiling at 90 MB/s

Real-world speed depends on the slowest drive in the chain, topping out at 90 MB/s and 5.4 GB per minute. The 128 MB buffer smooths bursts, but sustained throughput cannot exceed the SATA link or the media itself. Hot-swap bays let you swap targets without powering down the chassis.

Five targets per run

One operation clones or erases up to five drives, giving IT teams and forensic labs enough parallelism for small batches. Larger deployments need multiple passes or additional duplicators, and the standalone design means no software licences or host resources are consumed.

特長

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

仕様

BrandSystor
TypeHard Drive Duplicator
Target1 to 5
Data Transfer RateUp to 90MB/s (Depending on HDD speed)
Language SupportEnglish / Spanish / French / Japanese
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Package Contentssee pictures for details

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 1-to-5 target model or a different capacity?

This unit copies from one source to up to five targets at once, handling both 2.5 and 3.5 inch SATA drives in the same session.

What does the 90 MB/s transfer rate mean when I am actually cloning drives?

The duplicator can move data at up to 90 MB per second, limited by the speed of the slowest drive installed.

How does the SATA interface limit the erase and copy performance?

SATA connectivity caps throughput at the drive's native SATA speed, so the 90 MB/s peak and DoD 5220.22-M erase run at whatever rate each attached drive supports.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。