Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black standalone SATA duplicator with five hot-swap drive slots

Systor

Systor 1:5 SATA Hard Drive Duplicator & Sanitizer (SYS105HS-DP)

SKU CH-NPQ3-R5028

Standalone SATA duplicator copies or erases up to five 2.5 or 3.5 drives at 90 MB/s with 128 MB buffer and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Data Transfer RateUp to 90MB/s (Depending on HDD speed)
  • Language SupportEnglish / Spanish / French / Japanese
  • Operating TypeStandalone
  • ConnectorSATA

TARGET SIZE 1 to 05

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

Standalone SATA duplicator & sanitizer

The Systor 1:5 unit copies one source drive to five targets at once without a host PC. It handles both 2.5 and 3.5 SATA disks, including SSDs and HDDs, and runs sector-by-sector duplication plus multi-pass DoD 5220.22-M sanitisation. Menus are available in English, Spanish, French and Japanese.

Transfer ceiling at 90 MB/s

Real-world speed depends on the slowest drive in the chain, topping out at 90 MB/s and 5.4 GB per minute. The 128 MB buffer smooths bursts, but sustained throughput cannot exceed the SATA link or the media itself. Hot-swap bays let you swap targets without powering down the chassis.

Five targets per run

One operation clones or erases up to five drives, giving IT teams and forensic labs enough parallelism for small batches. Larger deployments need multiple passes or additional duplicators, and the standalone design means no software licences or host resources are consumed.

Fordele

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

Specifikationer

BrandSystor
TypeHard Drive Duplicator
Target1 to 5
Data Transfer RateUp to 90MB/s (Depending on HDD speed)
Language SupportEnglish / Spanish / French / Japanese
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Package Contentssee pictures for details

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 1-to-5 target model or a different capacity?

This unit copies from one source to up to five targets at once, handling both 2.5 and 3.5 inch SATA drives in the same session.

What does the 90 MB/s transfer rate mean when I am actually cloning drives?

The duplicator can move data at up to 90 MB per second, limited by the speed of the slowest drive installed.

How does the SATA interface limit the erase and copy performance?

SATA connectivity caps throughput at the drive's native SATA speed, so the 90 MB/s peak and DoD 5220.22-M erase run at whatever rate each attached drive supports.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.